YASKAWA v1000 Installation Manual page 25

12.
Attach the option to the drive. Properly seat the tabs on the left and right sides of the
option to the drive case.
13.
Connect the ground wire at the option ground terminal. Tighten the screw to 0.5 to
0.6 N•m or (4.4 to 5.3 in lbs) using an M3 Phillips screwdriver.
YASKAWA TOEP YAICOM 15A V1000 Option Dual-Port EtherNet/IP SI-EN3D/V Installation Manual
Figure 15 Ground Wire Routing
Line up tabs
Line up tabs
Figure 16 Connect the Option
5 Installation Procedure
25