Chapter 5: Build Plate Leveling - Flashforge Invertor II User Manual

Chapter 5: Build Plate Leveling

InventorⅡ creatively adopts three-point intelligent leveling system, which will give
clear and comprehensive feedback to users. There are three spring-loaded knobs under
the build platform. The distance between the plate and nozzle increases while
tightening the knobs. On the contrary, the distance reduces.
5-1
[Tools]-[Level]
(5-1) Tap on your InventorⅡ touch screen. Please wait while the
extruder and platform finish initial movements. After that, operate according to the
guide on the touch screen.
5-2
29
InventorⅡ User Guide | www.flashforge.com 400-699-1063