Chapter 5: Build Plate Leveling - Flashforge Creator Pro User Manual

Chapter 5: Build Plate Leveling

Every printer will be leveled before shipped out, but we can't ensure that the platform won't move during
delivery, so it will be better to level platform before you begin to print.
SD Card Slot
Raise the build plate to reduce the distance between the nozzle and build plate.
How to use the leveling knobs
Rotate knob clockwise
17
FF Creator Pro
Print from SD
Preheat
Utilities
ENG
FlashPrint GoΣ
Happy3D soft
Σ
..
PlateLeveling.x3g
test model
Exit Menu
1. Attach the power supply, plug the power
cable into an electrical outlet and turn on
the printer.
2. Insert the SD card into the slot. Tap
[Print from SD] and Tap [OK]. Tap [ENG]
and tap [OK].
Then you will see the [Plateleveling.x3g].