Mitsubishi MELSEC Q Series User Manual page 360

11 COMMUNICATION BETWEEN THE MASTER STATION AND LOCAL
STATIONS
Item
1 to 7
Retry count
Default: 3
Automatic reconnection 1 to 10
station count Default: 1
Blank, 1 to 64 (Blank: No standby master station
Standby master station No. specified)
Default: Blank
Stop/continue
PLC down select
Default: Stop
Asynchronous/synchronous
Scan mode setting
Default: Asynchronous
0 to 100 (0: Not specified)
Delay information setting
Default: 0
Station
Station type
No.
1 Ver.1Intelligent device station
5 Ver.2Intelligent device station
11 - 17
Setting range
Number of
Expanded
occupied
cyclic setting
stations
Occupies
single
4 stations
Occupies
double
2 stations
(b) Example of network parameter settings
An example of network parameter settings is shown below:
Asynchronous /synchronous
Reserve/invalid
Remote station
points
station select
128 points No setting
96 points No setting
MELSEC-Q
Setting value
3 times
1 modules
Stop /continue
Intelligent buffer select (word)
Send Receive Automatic
64 64 128
64 64 128
11 - 17