Procedure From Parameter Settings To Data Link Startup With Gx Developer; Procedure From Parameter Settings To Data Link Startup With Dedicated Instruction - Mitsubishi MELSEC Q Series User Manual

6 PARAMETER SETTINGS

6.1.2 Procedure from parameter settings to data link startup with GX Developer

The GX Developer is used
to create the network
parameters and
automatic refresh
parameters, which are
then written to the
PLC CPU.
When the PLC system is
powered ON or the PLC
CPU is reset, the network
parameters in the PLC
CPU are transferred to
the master station and
the data link is
automatically started.
6

6.1.3 Procedure from parameter settings to data link startup with dedicated instruction

GX Developer is used to
create the PLC parameters
(I/O assignment setting)
and a sequence program
(containing the RLPASET
instruction), which are
then written to the PLC
CPU.
Turn the power supply to
the PLC system on, or
reset the PLC CPU. Stop
and then run the PLC CPU
to execute the sequence
program. The network
parameters are set and the
data link is started by the
RLPASET instruction.
The RLPASET instruction
is completed after the data
link is started.
6 - 2
Follow the procedure below from parameter settings to data link startup:
GX Developer
Network
parameters
Automatic refresh
parameters
GX Developer
Network
parameters
Automatic refresh
parameters
Follow the procedure below from parameter settings to data link startup:
GX Developer
PLC parameter
Sequence program
(RLPASET instruction)
GX Developer
PLC parameter
Sequence program
(RLPASET instruction)
PLC CPU
CC-Link system
parameter area
Network
parameters
Automatic refresh
parameters
PLC CPU
CC-Link system
parameter area
Network
parameters
Automatic refresh
parameters
PLC CPU
Program memory
PLC parameter
Sequence program
(RLPASET instruction)
PLC CPU
Program memory
PLC parameter
Sequence program
(RLPASET instruction)
MELSEC-Q
Master station
Parameter memory
Network
parameters
Master station
Parameter memory
Network
parameters
Master station
Parameter area
Network
parameter
Master station
Parameter area
Network
parameter
6 - 2