Mitsubishi MELSEC Q Series User Manual page 217

6 PARAMETER SETTINGS
· Parameter registration (data link startup)
Processing at completion of the RLPASET instruction
Parameter setting change
Parameter
change
instructoin
RLPASET instruction
· Control data
· Slave station setting data
*1 Set the station number in hexadecimal. (Example) Set 14
6 - 51
Performs abnormal
completion processing
for station No. 20.
H
MELSEC-Q
Dedicated instruction
(RLPASET)
Turn the parameter setting
instruction off.
Instruct to refresh at normal
completion of the RLPASET
instruction.
Instruct to start the control
program at normal completion
of the RLPASET instruction.
Instruct to stop data link
Turn the data link stop
instruction off
Instruct to stop refreshing
Instruct to change parameters
Clear complete status
Slave station setting data/send,
receive and automatic refresh
buffer assignment data: Valid
Number of connected modules
involved in communication: 3
Number of retries: 3 times
Number of automatic return
modules: 1 module
Operation specification when
CPU is down: Stop
Scan mode specification:
Asynchronous
Delay time setting: 0
Local station, occupies
First:
1 station, station
number 1 *1
Second: Remote I/O station,
occupies 1 station,
station number 2
Third: Remote I/O station,
occupies 1 station,
station number 3
6 - 51