Applicable System; Applicable Modules And Number Of Cpus That Can Be Mounted - Mitsubishi MELSEC Q Series User Manual

2 SYSTEM CONFIGURATION

2.2 Applicable System

2.2.1 Applicable modules and number of CPUs that can be mounted

2 - 4
Applicable PLC CPUs and notes on the system configuration are described below.
(1) Applicable modules and number of CPUs that can be mounted
The CPU modules and network modules (for remote I/O station) to which the
QJ61BT11N can be installed and number of modules that can be installed are
listed in the table below.
(a) When performing the parameter setting with the GX Developer
Applicable module
Q00JCPU
Q00CPU
Q01CPU
Q02CPU
Q02HCPU
CPU
Q06HCPU
module
Q12HCPU
Q25HCPU
Q12PHCPU
Q25PHCPU
Q12PRHCPU
Q25PRHCPU
QJ72LP25-25
Network
QJ72LP25G
module
QJ72BR15
1 See User's Manual (Function Explanation, Program Fundamentals) for the CPU
module to use.
2 Incompatible with the remote net additional mode. When the module is used,
operation cannot be guaranteed.
3 For use in the remote net additional mode, use the PLC CPU whose first
five digits of serial No. are 05032 or later.
If the incompatible PLC CPU is used, operation cannot be guaranteed.
4 For use in a redundant system, select the QJ61BT11N with first five digits of
serial No. "06052" or later.
When incompatible QJ61BT11N is used, the operation cannot be
guaranteed.
Number of CPUs that can be mounted
Maximum 2
Maximum 4
Maximum 4
Maximum 4
Maximum 4
MELSEC-Q
Remark
1 2
( ) ( )
It can be
mounted only
with the Q
mode.
1 3
( ) ( )
1 2
( ) ( )
1 2 4
( ) ( ) ( )
2
( )
2 - 4