Mitsubishi MELSEC Q Series User Manual page 218

6 PARAMETER SETTINGS
· Send, receive and automatic refresh buffer assignment data
· Parameter registration (data link startup)
Processing at completion of the RLPASET instruction
Start of the control program
Refresh of RX
Refresh of RWr
Station number 1 control program
Station number 2 control program
Station number 3 control program
Refresh of RWw
Refresh of RY
Refresh of SB/SW
*2 D150 and D160 are dummy devices.
6 - 52
Performs abnormal completion processing
Station number 1 control program
Station number 2 control program
Station number 3 control program
MELSEC-Q
First (station number 1) local station
Send buffer: 100 word
First (station number 1) local station
Receive buffer: 100 word
First (station number 1) local station
Automatic refresh buffer: 0 word
Dedicated instruction (RLPASET)*2
Turn the parameter setting
instruction off.
Instruct to refresh at normal
completion of the RLPASET
instruction.
Instruct to start the control
program at normal completion
of the RLPASET instruction.
RX00 to RX5F are read to
X1000 to X105F.
RXr0 to RWr3 are read to
D1000 to D1003.
D2000 to D2003 are written into
RWw0 to RWw3
Y1000 to Y105F are written into
RY00 to RY5F
SB0000 to SB003F are refreshed.
SW0000 to SW003F are refreshed.
6 - 52