Mitsubishi MELSEC Q Series User Manual page 329

10 COMMUNICATION BETWEEN THE MASTER STATION AND REMOTE
DEVICE STATIONS
Item
1 to 7
Retry count
Default: 3
Automatic reconnection 1 to 10
station count Default: 1
Blank, 1 to 64 (Blank: No standby master station
Standby master station
specified)
No.
Default: Blank
Stop/continue
PLC down select
Default: Stop
Asynchronous/synchronous
Scan mode setting
Default: Asynchronous
0 to 100 (0: Not specified)
Delay information setting
Default: 0
Station
Station type
No.
1 Ver.1Remote device station
4 Ver.2Remote device station
10 - 43
Setting range
Number of
Expanded
occupied
cyclic setting
stations
Occupies
single
3 stations
Occupies
quadruple
1 station
(b) Example of network parameter settings
An example of network parameter settings is shown below:
Asynchronous /synchronous
Reserve/invalid
Remote
station points
station select
96 points No setting
64 points No setting
MELSEC-Q
Setting value
3 times
1 modules
Stop /continue
Intelligent buffer select (word)
Send Receive Automatic
10 - 43