Confirming The Operation With The Sequence Program - Mitsubishi MELSEC Q Series User Manual

9 COMMUNICATION BETWEEN THE MASTER STATION AND REMOTE
I/O STATIONS
Q61P-A1
Remote I/O station (station number 1)
AJ65BTB1-16D
Input module
X00
1)
9 - 10

(2) Confirming the operation with the sequence program

Using the sequence program, confirm that the data link is being performed
normally.
1) For example, when X00 of the remote I/O station AJ65BTB1-16D (station
number 1) is turned on, Y40 (QY41P) of the master station turns on.
2) When X21 (QX41) of the master station is turned on, Y08 of the remote I/O
station AJ65BTB1-16DT (station Number 3) turns on.
Master
station
Q06HCPU QJ61BT11N QX41 QY41P QX41
X21
Terminal
resistor
ON
2)
Remote I/O station (station number 2)
ON
QY41P
Y40
ON
1)
AJ65BTB1-16T
Output module
Terminal
resistor
MELSEC-Q
Remote I/O station (station number 3)
AJ65BTB1-16DT
I/O module
ON
2)
Y08
9 - 10