Setting The Network Parameters Of The Ver.2 Compatible Local Station (Station Number 5) - Mitsubishi MELSEC Q Series User Manual

11 COMMUNICATION BETWEEN THE MASTER STATION AND LOCAL
STATIONS
Item
Start I/O No. 0000 to 0FE0
Data link
Input data hold/clear
disorder
Default: Clear
station setting
Case of CPU Refresh/clears compulsorily
STOP setting Default: Refresh
Operational
Number of
settings
Occupies 1 to 4 stations
occupied
Default: Occupies 1 station
stations
Expanded single/double/quadruple/octuple
cyclic setting Default: single
Master station
Master station (Duplex function)
Type Local station
Standby master station
Default: Master station
Remote net (Ver.1 mode)
Remote net (Ver.2 mode)
Remote net (Additional mode)
Mode
Remote I/O net mode
Off line
Default: Remote net (Ver.1 mode)
1 to 64
All connect count
Default: 64
Remote input (RX) Device name: Select from X, M, L, B, D, W, R or ZR
Device name: Select from Y, M, L, B, T, C, ST, D, W,
Remote output (RY)
Remote register (RWr) Device name: Select from M, L, B, D, W, R or ZR
Device name: Select from M, L, B, T, C, ST, D, W, R
Remote register (RWw)
Ver.2 Remote input (RX) Device name: Select from X, M, L, B, D, W, R or ZR
Device name: Select from Y, M, L, B, T, C, ST, D, W,
Ver.2 Remote output (RY)
Ver.2 Remote register Device name: Select from M, L, B, D, W, R or ZR
(RWr)
Ver.2 Remote register Device name: Select from M, L, B, T, C, ST, D, W, R
(RWw)
Special relay (SB) Device name: Select from M, L, B, D, W, R, SB or ZR
Special register (SW) Device name: Select from M, L, B, D, W, R, SW or ZR
11 - 22
(3) Setting the network parameters of the ver.2 compatible local station
(station number 5)
(a) Setting the network parameters
Set the network parameters as follows using the attached parameter setting
checklist.
Setting range
R or ZR
or ZR
R or ZR
or ZR
MELSEC-Q
Setting value
0000
Hold/ clear
Refresh /Clears compulsorily
Occupies 2 stations
double
Master station
Master station (Duplex function)
Local station
Standby master station
Remote net (Ver.1 mode)
Remote net (Ver.2 mode)
Remote net (Additional mode)
Remote I/O net mode
Off line
modules
11 - 22