Mitsubishi MELSEC Q Series User Manual page 210

6 PARAMETER SETTINGS
6 - 44
(c) Set the Parameter name using "Operational settings." (Even if the Parameter
name is not set, this will not affect the operation of the CC-Link system).
Default value : None
Setting range: 8 characters or less
Example) Set "CC-LinkM".
(d) Set the input status for the data link error station using "Operational settings".
Default value : Clear ("Hold input data" not checked)
Setting range: Hold ("Hold input data" checked)
Example) Set to Clear ("Hold input data" not checked).
(f) Set the slave station refresh/compulsory clear setting at PLC CPU STOP
using "Operational settings".
Default value : Refresh ("Clears compulsorily " not checked)
Setting range: Refresh ("Clears compulsorily " not checked)
Example) Set to Refresh ("Clears compulsorily " not checked).
Clear ("Hold input data" not checked)
Clears compulsorily ("Clears compulsorily"
checked)
MELSEC-Q
6 - 44