Setting The Image Buffer, Motion Detection, Audio Playback And Interval Timer (Event) - Canon VB-C60 Operation Manual

Setting the Image Buffer, Motion Detection, Audio
Playback and Interval Timer (Event)
You can set the following items.
Image Buffer
Set the items associated with the temporary saving of image in the image buffer.
Motion Detection
Set the operation to be performed at the time of motion detection.
External Device Input
Set the operation to be performed when an event is input from an external device.
Interval Timer
Set the timer period for e-mail notification or upload.
Sound Clip Upload
Set the audio file to be registered as a sound playback.
Image Buffer
(1) [Frame Rate]
Set the frame rate that applies when image is temporarily saved in the image buffer when an
event occurs.
(2) [Pre-event Buffer (number of image frames)]
Set the number of images to be buffered before the event.
(3) [Post-event Buffer (number of image frames)]
Set the number of images to be buffered after the event.
Note
The maximum image buffer size is approx. 4 MB. If a large image size is set, the Frame
Rate, Pre-event Buffer and Post-event Buffer may not be achieved as specified (
If buffering cannot be achieved as specified, an event log message appears. Before using
a large image size, confirm that no messages appear in the event log (
1-34
P. 1-24).
P. 1-24).