Log Message List; Vb-C60 Log Messages - Canon VB-C60 Operation Manual

Log Message List

VB-C60 Log Messages

Log messages are divided into the following 6 categories.
Classification
alert
crit
err
warning
notice
info
■ Application Messages (Camera)
●A030 WebView Livescope client start and stop
Message
%1
%2
Explanation
●A031 Image data transmission quantity
Message
%1
●A101 Invalid user name
Message
Explanation
●A102 Invalid password
Message
Explanation
●A111 Invalid host
Message
Explanation
●A160 Pan/tilt sub system recover
Message
Explanation
Remark
5-6
Level Code Error level
Error 5xx Hardware level failure (system operation stops)
Error 4xx Software level failure (task operation stops)
Error 3xx A failure affecting camera operation (task continues)
Warning 2xx A failure not affecting the camera operation
Warning 1xx A failure external to the system
Information 0xx Information regarding normal operation
%1%2 host=<host>, user=<user>, prio=<priority>
W: WebView session, V: Sessionless Video Client,
N: Sessionless Event Client
+: Connect, -: Disconnect
The camera server client has been connected or disconnected.
%1 host=<host>, user=<user>, video=<jpg | mp4>:<number of frames>
W: WebView session, V: Sessionless Video Client
user <user name> not found
Access was made by an unauthorized user.
user <user name> password mismatch
The password is invalid.
host <IP address> access denied
Access was made by a prohibited host.
<pan | tilt> recovered
The pan/tilt subsystem being stopped has recovered.
Refer to A460.