Table of Contents
Advertisement
Chapter 1: Product Introduction
Getting to Know VTC 6201 / VTC 6201-M
Front Panel
GPRS/UMTS/HSDPA module
antenna mounting
Power button
Vehicle PC Mode
Mode A (default setting). When the ignition is from "low" to "high",
VTC 6201 / VTC 6201-M will turn on automatically. When the ignition is
"high", press the power button to turn off VTC 6201 / VTC 6201-M.
When the ignition is from "high" to "low", VTC 6201 / VTC 6201-M will
turn off automatically.
Copyright © 2011 Nexcom International Co., Ltd. All Rights Reserved
WiFi/Bluetooth module
antenna mounting holes
USB
LEDs
SIM card socket
Line-out
Mic-in
Startup and Shutdown Mode (Refer to SW2 setting)
The start up and shut down setting modes are as follows.
1. Mode A (default setting). When the input power voltage is 12V, use SW2
to select this voltage. Use the BIOS to select the start up and shut down
voltages.
2. Mode B. When the input power voltage is 24V, use SW2 to select this
voltage. Use the BIOS to select the start up and shut down voltages.
3. Mode C. When the input power voltage is 48V, use SW2 to select this
voltage. Use the BIOS to select the start up and shut down voltages.
6
VTC 6201 Series User Manual
Advertisement
Table of Contents
