1. Manuals
  2. Brands
  3. Nexcom Manuals
  4. Automobile Accessories
  5. VTC 7200-BK
  6. User manual

Nexcom VTC 7200-BK User Manual

Vehicle telematics computer
Hide thumbs
Table of Contents

Advertisement

Quick Links

NEXCOM International Co., Ltd.
Mobile Computing Solutions
Vehicle Telematics Computer
VTC 7200-BK/7210-BK/7220-BK/7230-BK/7240-BK
User Manual
NEXCOM International Co., Ltd.
www.nexcom.com
Published March 2017

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VTC 7200-BK and is the answer not in the manual?

Questions and answers

Related Manuals for Nexcom VTC 7200-BK

Summary of Contents for Nexcom VTC 7200-BK

  • Page 1 NEXCOM International Co., Ltd. Mobile Computing Solutions Vehicle Telematics Computer VTC 7200-BK/7210-BK/7220-BK/7230-BK/7240-BK User Manual NEXCOM International Co., Ltd. www.nexcom.com Published March 2017...

  • Page 2: Table Of Contents

    Chapter 2: External Connectors Pinout Description Jumper Settings ..................18 DIP Switch Settings ................20 Event Button ..................6 GPIO Pull High Switch ................20 LED Indicators (HDD, WWAN, Power & WLAN) ........6 Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7200-BK Series User Manual...
  • Page 3 Optional Internal WWAN SIM1 Card Socket For CN23 .......39 GPIO Pinout Description ................59 Optional Internal WWAN SIM2 Card Socket For CN21 or CN23 ..39 SW1 Setting ..................59 Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7200-BK Series User Manual...
  • Page 4 VIOX-CAN01 Setup ................75 AT Command Summary ................76 Simple Data Protocol: (ASCII CODE) ............77 Simple Data Protocol: (HEX CODE) ............78 J1939 Raw Data Protocol (HEX CODE) ..........79 Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7200-BK Series User Manual...

  • Page 5: Preface

    Acknowledgements The product(s) described in this manual complies with all applicable VTC 7200-BK, VTC 7210-BK, VTC 7220-BK, VTC 7230-BK and VTC 7240-BK European Union (CE) directives if it has a CE marking. For computer systems are trademarks of NEXCOM International Co., Ltd. All other product names to remain CE compliant, only CE-compliant parts may be used.

  • Page 6: Rohs Compliance

    0.1% or 1,000ppm, and Polybrominated diphenyl Ethers (PBDE) < 0.1% or 1,000ppm. In order to meet the RoHS compliant directives, NEXCOM has established an engineering and manufacturing task force in to implement the introduction of green products. The task force will ensure that we follow the standard...

  • Page 7: Warranty And Rma

    ▪ Replace with 3rd party products if needed. ▪ Customers must collect all the information about the problems ▪ If RMA goods can not be repaired, NEXCOM will return it to the customer encountered and note anything abnormal or, print out any on-screen without any charge.

  • Page 8: Safety Information

    Always power off the system before inserting or removing the SIM only with the same or equivalent type recommended by the manufacturer. card. Discard used batteries according to the manufacturer’s instructions. viii Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7200-BK Series User Manual...
  • Page 9 ▪ The computer is provided with CD drives that comply with the appropriate ▪ All cautions and warnings on the equipment should be noted. safety standards including IEC 60825. Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7200-BK Series User Manual...

  • Page 10: Technical Support And Assistance

    Preface Technical Support and Assistance Conventions Used in this Manual 1. For the most updated information of NEXCOM products, visit NEXCOM’s Warning: website at www.nexcom.com. Information about certain situations, which if not observed, can cause personal injury. This will prevent injury to yourself 2.

  • Page 11: Global Service Contact Information

    ZhongHe District, Beijing, 100094, China New Taipei City, 23586, Taiwan, R.O.C. Tel: +86-10-5704-2680 Tel: +886-2-8226-7796 Fax: +86-10-5704-2681 Fax: +886-2-8226-7792 Email: sales@nexcom.cn Email: sales@nexcom.com.tw www.nexcom.cn www.nexcom.com.tw Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7200-BK Series User Manual...
  • Page 12 Hui Yin Ming Zun Building Room 1108, Building No. 11, 599 Yunling Road, Putuo District, Shanghai, 200062, China Tel: +86-21-6125-8282 Fax: +86-21-6125-8281 Email: frankyang@nexcom.cn www.nexcom.cn Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7200-BK Series User Manual...

  • Page 13: Package Contents

    Preface Package Contents Before continuing, verify that the VTC 7200-BK series package that you received is complete. Your VTC 7200-BK series package should have all the items listed in the following table. Item Name Specification 4NCPF00204X00 Terminal Blocks 2P Phoenix Contact:1777989 5.08mm Female DIP Green...

  • Page 14: Ordering Information

    Preface Ordering Information The following provides ordering information for VTC 7200-BK series. ▪ VTC 7200-BK (P/N : 10V00720000X0) Intel ® Core™ processor i3-4010U, 1.7GHz dual core CPU, Industrial Grade 2GB DDR3L SO-DIMM, VGA/DP output, 2 LAN, 2x RS-232, 1x RS- 232/422/485, 8x GPIO, 3x USB, 12VDC output ▪...

  • Page 15: Chapter 1: Product Introduction

    Mic1 GPIO/CAN/OBDII Fuse Reset USB 3.0 / USB 2.0 CFast Line-out2 Mic2 Line-out1 SSD/HDD Antenna holes COM3 COM2 COM1 MCU-DIO GPS antenna hole Antenna holes Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7200-BK Series User Manual...

  • Page 16: Overview

    With dual SIM cards support, VTC 7200-BK series allows three SIM cards backup each other for a better connectivity quality by software. In addition, three SIM cards + dual WWAN modules architecture can increase the bandwidth for a faster data transfer speed.

  • Page 17: Hardware Specifications

    ▪ 2x 2.5” SATA 3.0 SSD/HDD (removable & hot swappable), RAID 0,1 supported Digital Output (source type): 3~24VDC, max current: 150mA (optional lockable storage available) ▪ 1x 12VDC output (2A), SM Bus Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7200-BK Series User Manual...
  • Page 18 ▪ Vibration (SSD/HDD): Operating: MIL-STD-810G, Method 514.6, Category 4, common carrier US highway truck vibration exposure Storage: MIL-STD-810G, Method 514.6, Category 24, minimum integrity test Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7200-BK Series User Manual...

  • Page 19: Connector Numbering

    The following diagrams indicate the numbers of the connectors. Use these numbers to locate the connectors’ respective pinout assignments on chapter 2 of the manual.           Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7200-BK Series User Manual...

  • Page 20: Chapter 2: External Connectors Pinout Description

    WWAN WLAN Definition LED Behavior Event Input Light On: HDD/SSD Active Light On: Power On Light Off: Power Off WWAN Blinking: Active WLAN Blinking: Active Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7200-BK Series User Manual...

  • Page 21: Reset

    SIM 1 Definition Definition Definition SIM PWR SIM RST RESET SIM CLK SIM DAT SIM 2 Definition Definition SIM PWR SIM RST SIM CLK SIM DAT Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7200-BK Series User Manual...

  • Page 22: Usb 3.0 And Usb 2.0 Ports (Front)

    USB3_TXP SATA2_TXN CFAST_LED1 CFAST_LED2 SATA2_RXN PC10 USB 2.0 Pin Connector Definition SATA2_RXP PC11 Definition Definition PC12 USB1_N CFAST_CDI PC13 USB1_P PC14 PC15 PC16 PC17 CFAST_CDO Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7200-BK Series User Manual...

  • Page 23: Line-Out2

    Chapter 2: External Connectors Pinout Description Line-out2 Mic2 Connector Number: 7 Connector Number: 8 Definition Definition Definition Definition Headphone (mono) Detect Detect Headphone (mono) Mic-In (Right Channel) to WWAN module Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7200-BK Series User Manual...

  • Page 24: Lan2 Port

    Definition MDI0P MDI0N MDI0P MDI0N MDI1P MDI2P MDI1P MDI2P MDI2N MDI1N MDI2N MDI1N MDI3P MDI3N MDI3P MDI3N LED1- LED1+ LED1- LED1+ LED2- LED2+ LED2- LED2+ Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7200-BK Series User Manual...

  • Page 25: Mic1

    Chapter 2: External Connectors Pinout Description Mic1 Line-out1 Connector Number: 11 Connector Number: 12 Definition Definition Definition Definition Mic-In (Left Channel) Left Channel Detect Detect Right Channel Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7200-BK Series User Manual...

  • Page 26: Usb 3.0 And Usb 2.0 Ports (Rear)

    DAT1_P USB0_N USB0_P DAT1_N DAT2_P USB3_RXN USB3_RXP USB3_TXN DAT2_N DAT2_N DAT3_N USB3_TXP DP_AUX_EN# AUX_P_CCLK USB 2.0 Pin Connector Definition AUX_N_CDAT Definition Definition VCC3 USB1_N USB1_P Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7200-BK Series User Manual...

  • Page 27: Vga

    GPIO6 (Default: GPO2) VGA_HS VGA_VS GPIO7 (Default: GPO3) VGA_CLK GPIO8 (Default: GPO4) GPIO can be programmed by S/W. Please refer to the source code in utility. Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7200-BK Series User Manual...

  • Page 28: Dc Output

    DC Input 9V-36V Connector Number: 17 Connector Number: 18 Definition Definition Definition Voltage from Car Battery GND_IN 12VDC Out (2A) (2A) V_IN SMB_CLK(For VTK61B) IGNITION SMB_DAT(For VTK61B) Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7200-BK Series User Manual...

  • Page 29: Com1 And Com3

    Connector Number: 20 RS232 / RS422 / RS485 is selected in BIOS setting RS232 (Default) Definition Definition Definition Definition RS422/485 Definition Definition TXD- TXD+ RXD+ RXD- Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7200-BK Series User Manual...

  • Page 30: Mcu-Dio

    Chapter 2: External Connectors Pinout Description MCU-DIO Connector Number: 21 Definition Definition MCU-DO2 MCU-DO1 MCU-DI1 MCU-DI2 Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7200-BK Series User Manual...

  • Page 31: Chapter 3: Jumpers And Switches

    Chapter 3: Jumpers and Switches Chapter 3: Jumpers and Switches Precautions This chapter describes how to set the jumpers on the VTC 7200-BK series motherboard. Computer components and electronic circuit boards can be damaged by Before You Begin discharges of static electricity. Working on the computers that are still connected to a power supply can be extremely dangerous.

  • Page 32: Jumper Settings

    (on) and open (off). Two-Pin Jumpers: Open (Left) and Short (Right) Three-Pin Jumpers: Pins 1 and 2 are Short Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7200-BK Series User Manual...
  • Page 33 Chapter 3: Jumpers and Switches VTC 7200-BK Series Connector Specification & Jumper Setting VTC 7200-BK series carrier board placement The figure below is the carrier board used in the VTC 7200-BK series. It shows the locations of the jumpers and connectors. CN13 CN12...

  • Page 34: Dip Switch Settings

    (*) Default setting SW1.5 Pull up VCC5 Don’t care SW1.6 Pull up VCC5 Don’t care SW1.7 Pull up VCC5 Don’t care SW1.8 Pull up VCC5 Don’t care Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7200-BK Series User Manual...

  • Page 35: Vcc Selection Switch For Cn23 Mini-Pcie Socket

    Chapter 3: Jumpers and Switches VCC Selection Switch for CN23 Mini-PCIe Socket Connector location: SW3 Function Definition CN21 3.3V (*) 1-2 OFF CN21 3.6V 1-2 ON (*) Default setting Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7200-BK Series User Manual...

  • Page 36: Wwan Module Selector (For Wake-Up & Voice Functions On Mini-Pcie Cn23)

    Wake-Up & Voice Voice Voice* SW6.1 SW6.2 SW6.3 SW6.4 Digital Disabled MC8090 HE910 (I2S) MC73xx(PCM) (default) (PCM) Voice** *Default Settings **Digital voice is selectable in BIOS. Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7200-BK Series User Manual...

  • Page 37: Input Voltage Control Switch

    Chapter 3: Jumpers and Switches Input Voltage Control Switch Connector location: SW8 Function Definition 1-2 OFF 1 OFF, 2 ON 9-36V 1-2 ON (Default) Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7200-BK Series User Manual...

  • Page 38: Power Sw Connector

    Connector size: 1 x 2 = 2-pin header (2.5mm) Connector size: 1 x 6 = 6-pin header (2.54mm) Connector location: J24 Connector location: JP8 Definition Definition Definition HW_PWRBT VCC3 Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7200-BK Series User Manual...

  • Page 39: Mcu Debug Com Connector

    Connector size: 1 x 3 = 3-pin header (2.54mm) Connector size: 1 x 5 = 5-pin header (2.54mm) Connector location: JP7 Connector location: JP9 Definition Definition Definition VCC3 MRST C2CK Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7200-BK Series User Manual...

  • Page 40: Mcu Temp Sensor

    Connector size: 1 x 2 = 2-pin header (2.54mm) Connector size: 1 x 6 = 6-pin header (2.00mm) Connector location: JP6 Connector location: J14 Definition Definition Definition Temp Sensor Panel_backlight Panel_VDD LVDS_PANEL L_BKLT_CTRL Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7200-BK Series User Manual...

  • Page 41: Lvds Connector

    LVDSA_DATA3 LVDSA_DATA#0 LVDSA_DATA#3 Panel_VDD LVDS_GND LVDS_GND LVDSA_CLK LVDSA_CLK LVDSA_CLK# LVDSA_DATA#1 LVDS_GND LVDS_GND LVDSA_DATA2 Panel_backlight LVDSA_DATA#2 Panel_backlight LVDS_GND MCU_PWRBTN# USBHUB_2_N LVDS_DET# USBHUB_2_P LVDS_USB_PWR USB_GND USB_GND Panel_backlight Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7200-BK Series User Manual...

  • Page 42: Sata Connectors

    Connector size: 1 x 6 = 6-pin header (1.0mm) Connector location: CN16 and CN15 Connector location: J15 Definition Definition Definition Definition SATA1/0_TXP GPS_BAT GPS_LED# SATA1/0_TXN GPS_TX GPS_RX SATA1/0_RXN SATA1/0_RXP VCC3_GPS Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7200-BK Series User Manual...

  • Page 43: Expansion Connector (For Viob-Mpci Expansion Card)

    Connector size: 1 x 10 = 10-pin header (1.0mm) Connector location: J16 Connector location: CN12 and CN17 Definition Definition Definition Definition USBHUB_3_P1 USBHUB_3_N1 PEX_B_TX5P PEX_B_TX5N PEX_B_RX5P PEX_B_RX5N SMB_DATA SMB_CLK CB_RESET#_B EXP_DISABLE# MINI_CLKP4 MINI_CLKN4 Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7200-BK Series User Manual...

  • Page 44: Com2 Rs232/422/485 Connector

    Connector size: 1 x 2 = 2-pin header (2.54mm) Connector location: CN14 Connector location: JP2 RS232 Definition Definition Definition Temp DTR_RX- RXD_TX+ RI_PWR TXD_RX+ DCD_TX- RS485 Definition Definition DATA+ DATA- RS422 Definition Definition Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7200-BK Series User Manual...

  • Page 45: Rtc Battery Connector

    Connector size: 1 x 10 = 10-pin header (1.0mm) Connector location: J20 Connector location: J17 Definition Definition Definition PCIRST# RTC_BAT 33M_CLK LPC_FRAME# LPC_AD3 LPC_AD2 LPC_AD1 LPC_AD0 VCC3 VCC3 Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7200-BK Series User Manual...

  • Page 46: Optional Viob-Can03 Module Connector

    Connector location: JP3 and JP4 Connector location: J18 JP3 Output Definition Definition Definition VCC5 VIOB-CAN03-J1939_L VIOB-CAN03-CAN2.0_L VIOB-CAN03-J1939_H VIOB-CAN03-CAN2.0_H JP4 Input Definition Definition VCC5 CAN_DI CAN_DO RXD5 TXD5 Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7200-BK Series User Manual...

  • Page 47: 3G Gps Rf Connector

    Connector size: 1 x 10 = 10-pin header (1.0mm) Connector location: J19 Connector location: J21 Definition Definition Definition Definition RF_VCC3 RF_BY_PASS1 RF_BY_PASS2 VCC3 BT_AUDIO_EN USBHUB_3-N USBHUB_3-P Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7200-BK Series User Manual...

  • Page 48: Mini-Pcie (Pcie + Usb)

    +V1.5S_MINI1 SMBCLK +V1.5S_MINI1 PCIE_TX_N SMBDAT PCIE_TX_P USB- PCIE_CLK# USB+ PCIE_CLK +V3.3_MINI1 +V3.3_MINI1 WLAN_LED# WLAN_DIS# PCH_CL_CLK WPAN_LED# RESET# PCH_CL_DAT +V1.5S_MINI1 PCIE_RX_N +V3.3_MINI1 PCH_CL_RST# PCIE_RX_P MINI_BT_DIS# +V3.3_MINI1 Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7200-BK Series User Manual...

  • Page 49: Mini-Pcie (Pcie + Usb)

    Definition Definition WAKE# +V3.3_MINI3 +V1.5S_MINI3 SMBCLK +V1.5S_MINI3 PCIE_TX_N SMBDAT PCIE_TX_P USB- PCIE_CLK# USB+ PCIE_CLK +V3.3_MINI3 +V3.3_MINI3 WWAN_LED# WLAN_LED# WLAN_DIS# RESET# +V1.5S_MINI3 PCIE_RX_N +V3.3_MINI3 PCIE_RX_P +V3.3_MINI3 Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7200-BK Series User Manual...

  • Page 50: Mini-Pcie (Pcie + Usb)

    +V1.5S_MINI2 SMBCLK +V1.5S_MINI2 PCIE_TX_N SMBDAT UIMB_PWR PCIE_TX_P UIMB_DAT USB- PCIE_CLK# UIMB_CLK USB+ PCIE_CLK UIMB_RST +V3.3_MINI2 +V3.3_MINI2 WWAN_LED# WLAN_LED# WLAN_DIS# RESET# +V1.5S_MINI2 PCIE_RX_N +V3.3_MINI2 PCIE_RX_P +V3.3_MINI2 Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7200-BK Series User Manual...

  • Page 51: Internal Wwan Sim Card Socket (Sim 3) For Cn21

    Chapter 3: Jumpers and Switches Internal WWAN SIM Card Socket (SIM 3) For CN21 Connector location: CN20 Definition Definition SIM PWR SIM RST SIM CLK SIM DAT Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7200-BK Series User Manual...

  • Page 52: Mini-Pcie (Usb)

    MINI_MIC_N MINI_SPK_PRR CM8K_WAKE U_GND UIMA_PWR UMTS_RESET# UIMA_DAT USB- VCC_MSM26_DIG UIMA_CLK USB+ UIMA_RST +V3.3A_MINI4 +V3.3A_MINI4 WWAN_LED# PCM_TX_C8K PCM_SYNC_C8K 3.5G_DIS# PCM_CLK 3.5G_RST# PCM_RX +V3.3A_MINI4 PCM_TX PCM_SYNC +V3.3A_MINI4 Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7200-BK Series User Manual...

  • Page 53: Optional Internal Wwan Sim1 Card Socket For Cn23

    SIM PWR SIM RST SIM RST SIM CLK SIM DAT SIM CLK SIM DAT Please contact sales for further information. Please contact sales for further information. Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7200-BK Series User Manual...

  • Page 54: Chapter 4: System Setup

    1. The screws circled on the front, sides and rear are used to secure the bottom cover to the chassis. Remove these screws and put them in a safe place for later use. Side View Front View Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7200-BK Series User Manual...

  • Page 55: Installing A Ssd/Hdd Drive

    SSD/HDD bays. Thumb screws Mounting screws Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7200-BK Series User Manual...
  • Page 56 3. Connect the SATA data and power connectors to the two hard drive 4. Remove the tape covers on the damper brackets. brackets and screw the connectors in place. Tape cover Mounting screws Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7200-BK Series User Manual...
  • Page 57 HDD bracket Dampers Mounting screws Damper bracket Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7200-BK Series User Manual...
  • Page 58 8. With both the hard drive bays installed, secure them together by tightening screws into the center where the two brackets meet. Mounting screws Mounting screw Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7200-BK Series User Manual...
  • Page 59 10. Insert the drive bay in the left SSD/HDD slot and tighten the thumb connectors on the motherboard. screws to secure it. CN13 (SATA power) CN11 (SATA power) CN16 (SATA data) CN15 (SATA data) Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7200-BK Series User Manual...

  • Page 60: Installing A Wlan Module (Half Mini-Pcie)

    Then fasten screws into the mounting holes to secure the module. fasten screws into the mounting holes to secure the module. Mounting Mounting screws screws Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7200-BK Series User Manual...

  • Page 61: Installing The Second Wwan Module

    Mini PCI Express slot at a 45 degrees angle until the gold-plated connector on the edge of the module completely disappears inside the slot. Then fasten screws into the mounting holes to secure the module. Mounting screws Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7200-BK Series User Manual...

  • Page 62: Installing A So-Dimm

    Apply firm even pressure to each end of the module until it slips down into the socket. The contact fingers on the edge of the module will almost completely disappear inside the socket. Ejector tab Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7200-BK Series User Manual...

  • Page 63: Installing A Obdii Module

    1. Locate the OBDII connectors (JP3 and JP4). 2. Connect the OBDII module to JP4 and JP3 and secure the OBDII module with screws. Mounting screws Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7200-BK Series User Manual...

  • Page 64: Appendix A: Software Demo Utility For I/O Ports Of Function Control

    Appendix A: Software Demo Utility for I/O Ports of Function Control NEXCOM’s software demo utility enables users to test and control different I/O port functions on the VTC 7200-BK series. This document shows how to use the utility. There are also source code files of the utility in the CD. Users can refer to the source codes to develop their applications.

  • Page 65: 1.1 Status

    Low voltage …… Car battery is at low voltage. If the setting is 9V~36V: OK ..…..Car battery is not at low voltage. 9V~36V is shown Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7200-BK Series User Manual...

  • Page 66: 1.3 Output Power

    Selects the GPO ports and makes the output low or high. Enables or Disables the output of Car Battery Power. 1.4.3 GPI Read Reads the status of GPI. Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7200-BK Series User Manual...

  • Page 67: 1.5 Mcu Gpio Setting

    1.6 WDT Setting Enables or disables the WDT function. There are 9 selections of time. The timer of WDT can also be cleared by Clear Timer button. Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7200-BK Series User Manual...

  • Page 68: 1.7 Wwan Module

    Selects SIM1 or SIM2 card. 1.8 Power On Delay Time Enables or disables the power on delay time function. There are 8 selections of delay time. Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7200-BK Series User Manual...

  • Page 69: 1.10 Wake Up Function

    Enables or disables the RTC wake up function. The timer setting of RTC is 1.11.3 On Board CAN2.0B Data Link Status located in BIOS setting. Reads the connection status of on board CAN2.0B Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7200-BK Series User Manual...

  • Page 70: 1.12 Interface Power

    1.12.2 USB No.5 Enables or disables the power to USB ports (No.5) on front panel. 1.12.3 GPS Enables or disables the power to GPS module. Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7200-BK Series User Manual...

  • Page 71: Appendix B: Gps Feature

    Qualification tests are performed as stipulated in the ISO16750 lowest noise figure (NEO-M8N/Q) standard: “Road vehicles – Environmental conditions and testing for electrical and electronic equipment”. Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7200-BK Series User Manual...
  • Page 72 Manufactured and fully tested in ISO/TS 16949 certified production sites Configurable 0.25 Hz to 10 MHz Protocols NMEA, UBX binary, RTCM Uses u-blox M8 chips qualified according to AEC-Q100 Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7200-BK Series User Manual...

  • Page 73: Appendix C: Signal Connection Of Di/Do

    Default Settings: GPIO8 (Default: GPO4) GPIO (SW1) GPIO can be programmed by S/W. Please refer to the source code in utility. SW1.1~SW1.8 Pull up VCC5 Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7200-BK Series User Manual...

  • Page 74: Digital Input

    GPI6 GPI5 GPI4 GPIO3 External GPIO2 GPIO_GND Port GPIO1 Switch Register ON (Short) OFF (Open) HIGH External Port Switch Register ON (Short) OFF (Open) OPEN Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7200-BK Series User Manual...

  • Page 75: Digital Output

    GPIO7 GPIO7 GPO6 GPO6 GPO5 GPO5 GPO4 GPO4 GPIO3 External power GPIO3 GPIO2 GPIO_GND GPIO2 GPIO1 GPIO_GND GPIO1 Resistor Port Port Register Register HIGH OPEN Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7200-BK Series User Manual...

  • Page 76: Event Button

    External External Power Definition Definition External Resistor MCU-DI2 MCU-DO1 MCU-DO2 MCU-DO1 MCU-DI1 MCU-DO2 MCU-DI1 MCU-DI2 DB9-FEMALE-90-5.08mm External Port Switch Register ON (Short) OFF (Open) HIGH Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7200-BK Series User Manual...

  • Page 77: Digital Output

    The figure below shows how to connect an external input source to one of the output channel. Internal External External Power Definition External Resistor Event Input MCU-DI2 MCU-DO1 MCU-DI1 MCU-DO2 DB9-FEMALE-90-5.08mm Port Register OPEN Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7200-BK Series User Manual...
  • Page 78 *When Pre-Alarm function is enabled. *When Pre-Alarm function is enabled Internal External Internal External 3.3V pull high 3.3V pull high Pin 1 Pin 2 Pin 1 Pin 2 Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7200-BK Series User Manual...

  • Page 79: Pre-Alarm Function By Event Button, Mcu-Di And Mcu-Do

    Step 2: Select the trigger threshold level in BIOS For vehicles with electric central door lock, check the corresponding trigger type (negative or positive), then connect MCU-DI1 to Central Locking System in vehicle. Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7200-BK Series User Manual...

  • Page 80: Activating Pre-Alarm Function

    Flag C: at I/O Address -- 0x0ED8 bit5 Flag B: at I/O Address -- 0x0ED8 bit2 Option 3: When Ignition signal is “High”, Pre-Alarm Function is deactivated. Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7200-BK Series User Manual...

  • Page 81: Activating Pre-Alarm Function

    MCU-DO1 & MCU-DO2 “OPEN” “GND” “OPEN” “GND” VTC 7200 power on VTC 7200 power on Flag C is “1” Flag A is “1” Point A Point A Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7200-BK Series User Manual...

  • Page 82: Deactivating Pre-Alarm Function

    MCU-DI1 “High”? “High”? Flag B Flag B “1”? “1”? MCU-DO1 & MCU-DO2 MCU-DO1 & MCU-DO2 Ignition Ignition “Low” “High” “Low” “High” “High”? “High”? Start Start Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7200-BK Series User Manual...

  • Page 83: Appendix E: Vehicle Power Management Setup

    F4: Save & Exit F4: Save & Exit ESC: Exit ESC: Exit Version 2.14.1219. Copyright (C) 2010 American Megatrends, Inc. Version 2.14.1219. Copyright (C) 2010 American Megatrends, Inc. Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7200-BK Series User Manual...
  • Page 84 F4: Save & Exit F4: Save & Exit ESC: Exit ESC: Exit Version 2.14.1219. Copyright (C) 2010 American Megatrends, Inc. Version 2.14.1219. Copyright (C) 2010 American Megatrends, Inc. Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7200-BK Series User Manual...

  • Page 85: Power-On Delay Setting

    Version 2.14.1219. Copyright (C) 2010 American Megatrends, Inc. F2: Previous Values F3: Optimized Defaults F4: Save & Exit ESC: Exit Version 2.14.1219. Copyright (C) 2010 American Megatrends, Inc. Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7200-BK Series User Manual...
  • Page 86 F4: Save & Exit F4: Save & Exit ESC: Exit ESC: Exit Version 2.14.1219. Copyright (C) 2010 American Megatrends, Inc. Version 2.14.1219. Copyright (C) 2010 American Megatrends, Inc. Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7200-BK Series User Manual...

  • Page 87: Power-Off Delay Setting

    F3: Optimized Defaults F4: Save & Exit ESC: Exit Version 2.14.1219. Copyright (C) 2010 American Megatrends, Inc. Version 2.14.1219. Copyright (C) 2010 American Megatrends, Inc. Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7200-BK Series User Manual...
  • Page 88 F1: General Help 18 hour F2: Previous Values F3: Optimized Defaults F4: Save & Exit ESC: Exit Version 2.14.1219. Copyright (C) 2010 American Megatrends, Inc. Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7200-BK Series User Manual...

  • Page 89: Appendix F: Obdii Module Setup And Command

    AT command. Please refer the following section command and then press the return key: of AT command. >ATR or >AT R (spaces are optional; and case is in-sensetive). Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7200-BK Series User Manual...

  • Page 90: At Command Summary

    EX: AT#01 , to get speed high byte. Byte N:Vehicle ID byte N Byte N+1: Check Sun= Byte1+Byte2 +…..ByteN Byte N+1:0x0D Byte N+2:0x0A N: Max 35 Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7200-BK Series User Manual...

  • Page 91: Simple Data Protocol: (Ascii Code)

    Byte 19 Distance : D1 Byte 20 , Byte 21 Distance: D2 Byte 22 , Byte 23 FU, Average Fuel Economy (km/L) =Fu /10 Byte 24 , Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7200-BK Series User Manual...

  • Page 92: Simple Data Protocol: (Hex Code)

    0: Cruise Control (ON/OFF) unavailable 1: Cruise Control (ON/OFF) available Bit 0: 0: NORMAL 1: DTC ON 2.) Distance = D1*256+D2 3.) Average Fuel Economy =Fu /10 Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7200-BK Series User Manual...

  • Page 93: J1939 Raw Data Protocol (Hex Code)

    Byte 13 Check Sum Byte 14 0x0D Byte 15 0x0A MID=128 0x40 0x80 0x15 0x01 0x32 0xC8 0x0D 0x0A PID=21 (Engine ECU temperature) Data=50 Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7200-BK Series User Manual...

  • Page 94: J1939 Packaged Messages Protocol

    RPM= (RH*256+ RL)* 0.125 4. This is the common J1939 measurement overview showing which measurements are available. Note that not all measurements are supported by the individual engines. Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7200-BK Series User Manual...
  • Page 95 =((D4*256*256*256)+(D3*256*256)+(D2*256)+D1)*0.005 (KM) Axle location Bit-mapped position vehicle travel number counting front to back facing #33 D1 forward. #34 D2 Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7200-BK Series User Manual...
  • Page 96 0100 = 9 h reached 0101 = 15 min bef. 16 h #44 VS2 0110 = 16h reached 1110 = Error 1111 = not available Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7200-BK Series User Manual...
  • Page 97 01= request is supported enabled→door can be opened by a passenger 10 = reserved 11 = don´t care Bit4~Bit7:Resvered Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7200-BK Series User Manual...
  • Page 98 10 = error 10 = error 10 = error 11 = not available 11 = not available 11 = not available 11 = not available Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7200-BK Series User Manual...
  • Page 99 Information of the pressure of the air suspension bellow at the left 1100–1110 = Reserved side of the 1111 = not available front axle Pressure= ((BPRAR2*256)+BPRAR1)* 0.1 ,KPA Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7200-BK Series User Manual...
  • Page 100 1010 = Cond. Yellow 1011 = Cond. Info 1011 = Cond. Info 1100–1110 = Reserved 1100–1110 = Reserved 1111 = not available 1111 = not available Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7200-BK Series User Manual...
  • Page 101 Bit 7,6,5,4: Telltale Status 13 1000 = off 1001 = Cond. Red 1010 = Cond. Yellow 1011 = Cond. Info 1100–1110 = Reserved 1111 = not available Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7200-BK Series User Manual...

  • Page 102: J1708 Packaged Messages Protocol

    Byte 22: 0X0A Byte 22: 0X0A Byte 22: 0X0A Bits 4-1: Failure mode identifier (FMI) NOTE : The #00~#52 command respond that data are ASCII code. Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7200-BK Series User Manual...
  • Page 103 100% is full supply. Bit 1: 1 = Left wheel, 0 = Right wheel Maximum Range: 0.0 to 102.0% TP= data * 0.4% Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7200-BK Series User Manual...
  • Page 104 If vehicle dose not provide TVD, AT1708 replace the information #27 hh with the calculated distance, deviation is 0.5%, The first time connection AT1708 please command ATR to clear distance memory. Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7200-BK Series User Manual...
  • Page 105 Maximum Range: 0.0 to 219.8 kPa (0.0 to 31.875 lbf/in2) Bit 8: 1=active/0=not active Bits 7-1: Undefined PB=data * 0.862 (KPA) Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7200-BK Series User Manual...

  • Page 106: J1708 Command Example

    1996 (T), 199 7(V), 1998 (W), 1999 (X), 2000 (Y), 2001(1), 2002 (2), 2003 (3)….. Production Plant The sequence of the vehicle for production as it rolled of the manufacturers Sequential Number 178227 assembly line. Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7200-BK Series User Manual...

  • Page 107: Appendix G: Power Consumption

    10mA/12V 3.10A/12V 178mA/12V 12mA/12V 12mA/12V 35.28W 2.028W 0.12W 0.12W 37.2W 2.13W 0.144W 0.144W VTC 7220 Burn-in Mode 3.08A/12V 175mA/12V 12mA/12V 12mA/12V 36.96W 2.1W 0.144W 0.144W Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7200-BK Series User Manual...

This manual is also suitable for:

Vtc 7230-bkVtc 7240-bkVtc 7210-bkVtc 7220-bk

Table of Contents