Subscribe to Our Youtube Channel
Related Manuals for Nexcom VMC 1000
Summary of Contents for Nexcom VMC 1000
- Page 1 NEXCOM International Co., Ltd. Mobile Computing Solutions Vehicle Mount Computer VMC 1000 User Manual NEXCOM International Co., Ltd. www.nexcom.com Published March 2014...
-
Page 2: Table Of Contents
RTC Control Connector ................21 Getting to Know VTC 1000 ..............7 RTC Battery Connector ................21 Front Panel .....................7 Backlight Connector(power) ..............22 Rear Panel ....................8 Backlight Connector(data) ..............22 Copyright © 2011 NEXCOM International Co., Ltd. All rights reserved VMC 1000 User Manual... - Page 3 Vehicle Power Management Setup ............37 Appendix C: Power Consumption Power Consumption ................44 Appendix D: SMS Wake-up setting SMS Wake-up setting ................45 Appendix E: RTC Wake-up setting RTC Wake-up setting ................51 Copyright © 2011 NEXCOM International Co., Ltd. All rights reserved VMC 1000 User Manual...
-
Page 4: Preface
Acknowledgements The product(s) described in this manual complies with all applicable Euro- VMC 1000 is a trademark of NEXCOM International Co., Ltd. All other product pean Union (CE) directives if it has a CE marking. For computer systems to names mentioned herein are registered trademarks of their respective owners. -
Page 5: Rohs Compliance
0.1% or 1,000ppm, and Polybrominated diphenyl Ethers (PBDE) < 0.1% or 1,000ppm. In order to meet the RoHS compliant directives, NEXCOM has established an engineering and manufacturing task force in to implement the introduction of green products. The task force will ensure that we follow the standard... -
Page 6: Warranty And Rma
? Replace with 3 party products if needed. please note clearly which components are included. Otherwise, NEXCOM ? If RMA goods can not be repaired, NEXCOM will return it to the customer is not responsible for the devices/parts. without any charge. -
Page 7: Safety Information
The load of the system unit does not solely rely for support from the rackmounts located on the sides. Firm support from the bottom is highly If RMA goods can not be repaired, NEXCOM will return it to the customer necessary in order to provide balance stability. -
Page 8: Safety Precautions
11. All cautions and warnings on the equipment should be noted. 19. The computer is provided with CD drives that comply with the appro- priate safety standards including IEC 60825. viii Copyright © 2011 NEXCOM International Co., Ltd. All rights reserved VMC 1000 User Manual... -
Page 9: Technical Support And Assistance
Technical Support and Assistance Conventions Used in this Manual Warning: Information about certain situations, which if not ob- 1. For the most updated information of NEXCOM products, visit NEXCOM’s served, can cause personal injury. This will prevent injury to your- website at www.nexcom.com. -
Page 10: Global Service Contact Information
16F, No.250, Sec. 2, Chongde Rd., Tel: +86-21-5278-5868 Beitun Dist., Taichung City 406, R.O.C. Fax: +86-21-3251-6358 Tel: +886-4-2249-1179 Email: sales@nexcom.cn Fax: +886-4-2249-1172 www.nexcom.cn Email: sales@nexcom.com.tw www.nexcom.com.tw Copyright © 2011 NEXCOM International Co., Ltd. All rights reserved VMC 1000 User Manual... - Page 11 Fax: +44-1908-262042 Email: sales.uk@nexcom.eu Chengdu Office www.nexcom.eu 9F, Shuxiangxie, Xuefu Garden, No.12 Section 1, South Yihuan Rd., Chengdu, 610061, China Tel: +86-28-8523-0186 Fax: +86-28-8523-0186 Email: sales@nexcom.cn www.nexcom.cn Copyright © 2011 NEXCOM International Co., Ltd. All rights reserved VMC 1000 User Manual...
-
Page 12: Package Contents
Preface Package Contents Before continuing, verify that the VMC 1000 package that you received is complete. Your VMC 1000 package should have all the items listed in the following table. Item Name Specification 5044440135X00 THERMAL PAD E-LIN 25x25x1mm K=5w/mk TP-1800G... -
Page 13: Ordering Information
- 7-inch All in One Vehicle Mount Computer with Touch Screen and Smart Brightness Control and Intel ® Atom™ E640 1.0Ghz processor with 1GB DDR2, GPS module and GPS antenna xiii Copyright © 2011 NEXCOM International Co., Ltd. All rights reserved VMC 1000 User Manual... -
Page 14: Chapter 1: Product Introduction
• Compliant with IP54 • Built-in Intel® Atom™ E640 1.0GHz processor • Wake on RTC /SMS • Certified by CE/ FCC/ e13 Mark • GPS receiver on board Copyright © 2011 NEXCOM International Co., Ltd. All rights reserved VMC 1000 User Manual... - Page 15 Chapter 1: Product Introduction VMC 1000, a 7-inch all in one vehicle computer, is designed for the transportation application. Adopting the latest low power consumption processor, Intel® Atom™ E640, it integrates the high resolution LCD with the brightness of 400 nits and 4-wire resistive touch sensor.
-
Page 16: Hardware Specifications
• HW design ready for 8-level delay time on/off at user’s self configuration • Power on/off ignition, software detectable • Supports S3/S4 suspend mode ; wake on RTC/ SMS Copyright © 2011 NEXCOM International Co., Ltd. All rights reserved VMC 1000 User Manual... - Page 17 / 1min / 5min / 10min / 30min / 1hr / 6hr / 18hr. Vehicle – Highway Truck • S4 suspend mode Storage: MIL-STD-810F, Method 514.5, Category 24, Integrity Test • Ignition On/Off status detectable by SW • Low battery status detectable by SW • Ignition enable/disable is jumper selectable Copyright © 2011 NEXCOM International Co., Ltd. All rights reserved VMC 1000 User Manual...
- Page 18 60 sec. User can detect this situation via software. • If the ignition is off and the system is still on after 3 minutes, VMC 1000 will shut down automatically. • If the ignition is off, the user can detect this status via the software.
- Page 19 Chapter 1: Product Introduction Copyright © 2011 NEXCOM International Co., Ltd. All rights reserved VMC 1000 User Manual...
-
Page 20: Getting To Know Vtc 1000
Switching between Manual Mode and Auto Mode To toggle between Manual Mode and Auto Mode, press and hold the “+” or “-” buttons for 4 seconds. Copyright © 2011 NEXCOM International Co., Ltd. All rights reserved VMC 1000 User Manual... -
Page 21: Rear Panel
3.DB37 female connector (1x LAN ; 2x USB ; 1x RS232 ; 1 x RS422/485 ;6 x GPIO ; 1x CAN) 4.6~36V Wide Range DC power input Copyright © 2011 NEXCOM International Co., Ltd. All rights reserved VMC 1000 User Manual... -
Page 22: Lateral Side
Chapter 1: Product Introduction Getting to Know VMC 1000 Lateral Side 1.SIM slot 2.USB 2.0/1.1 3.Mic-in 4.Line-out Another side is power button and reset button3.Volume Control Copyright © 2011 NEXCOM International Co., Ltd. All rights reserved VMC 1000 User Manual... -
Page 23: Gps Connector
Connector location: CN10 Connector size: GPS SMA Connector 5 Pin Connector size: Male DSUB-9 PIN Definition SP_DCD_0 SP_RXD_0 Definition SP_TXD_0 RF_IN_F SP_DTR_0 CON0_GND SP_DSR_0 SP_RTS_0 SP_CTS_0 SP_RI_0 Copyright © 2011 NEXCOM International Co., Ltd. All rights reserved VMC 1000 User Manual... -
Page 24: Multi-Connector
USB_VCC5 USB_VCC5 HUSB_6N_R HUSB_6P_R HUSB_7N_R HUSB_7P_R RS422_TX+ U_GND RS422_TX- RS422_RX+ / RS485_+ CANH RS422_RX- / RS485_- CANL SP_RI_1 C_GND SP_DCD_1 SP_RXD_1 SP_TXD_1 SP_RTS_1 SP_CTS_1 SP_DSR_1 SP_DTR_1 Copyright © 2011 NEXCOM International Co., Ltd. All rights reserved VMC 1000 User Manual... -
Page 25: Dc Power Connector
Chapter 1: Product Introduction DC Power connector DC Power cable connector Pin color Definition YEL, HT Solder together for V_IN Definition V_IN 6~36V IGNITION Copyright © 2011 NEXCOM International Co., Ltd. All rights reserved VMC 1000 User Manual... -
Page 26: Sim Card Connector
SIM Card Reader Connector USB Connector Connector location: CN5 Connector location: USB1 Connector size: Single USB 4Pin Definition DATA-( USB_0N) DATA+( USB_0P) Definition UIM_PWR2 UIM_RST2 UIM_CLK2 UIM_DAT2 Copyright © 2011 NEXCOM International Co., Ltd. All rights reserved VMC 1000 User Manual... -
Page 27: Mic In Jack
Connector location: CN8 Connector size: EAR PHONE JACK PINK Connector size: EAR PHONE JACK GREEN Definition Definition FRONT_OUT_RC LINE_OUTD MIC_JD FRONT_OUT_LC MIC_OUT-L ACON_GND ACON_GND ACON_GND ACON_GND Copyright © 2011 NEXCOM International Co., Ltd. All rights reserved VMC 1000 User Manual... -
Page 28: Chapter 2: Jumpers And Connectors
Ground yourself before touching any internal components, by touching • Use correct screws and do not over tighten screws. a metal object. Static electricity can damage many of the electronic com- Copyright © 2011 NEXCOM International Co., Ltd. All rights reserved VMC 1000 User Manual... -
Page 29: Jumper
(on) and open (off). Two-Pin Jumpers: Open (Left) and Short (Right) Three-Pin Jumpers: Pins 1 and 2 Are Short Copyright © 2011 NEXCOM International Co., Ltd. All rights reserved VMC 1000 User Manual... -
Page 30: Locations Of The Jumpers And Connectors
Locations of the Jumpers and Connectors The figure below is the main board which is the board used in the VMC 1000 system. It shows the locations of the jumpers and connectors. Copyright © 2011 NEXCOM International Co., Ltd. All rights reserved... -
Page 31: Panel Connector
RXC- GND0 GND2 RX2+ GND3 RX0+ RX2- GND1 RXC+ RX0- RX1+ RX1- RXC- LR(default:1) GND0 GND2 UD(default:0) RX0+ RX0- RX2+ VCC_IN1 RX2- VCC_IN2 VCC_IN1 VCC_IN2 LCD_CON_20P Copyright © 2011 NEXCOM International Co., Ltd. All rights reserved VMC 1000 User Manual... -
Page 32: Touch Screen Connector
Connector size: 1mm Wafer 10 Pin180 Connector location: CN1 Connector location: J5 WAFER-M-180-1mm Definition FPC_1X4P-1mm LS_D LS_A KEY_V+ Definition KEY_V- TOUCH_XL KEY_BL+ TOUCH_YD KEY_BL- TOUCH_XR BOT_M_N TOUCH_YU AUTO_BL_LED POWER_LED Copyright © 2011 NEXCOM International Co., Ltd. All rights reserved VMC 1000 User Manual... -
Page 33: Speaker Connector
Connector location: J2, J6 Connector location: JP3, JP5 WAFER-M-90-1mm PIN-M-180-2.54mm Definition Definition Definition FRONT_A_R+_R +V3.3ALW +V_MCU2 FRONT_A_R-_R C2D_1 C2D_2 MRST_1 MRST_2 C2CK_1 C2CK_2 Definition FRONT_A_L+_R FRONT_A_L-_R Copyright © 2011 NEXCOM International Co., Ltd. All rights reserved VMC 1000 User Manual... -
Page 34: Rtc Control Connector
Chapter 2: Jumpers and Connectors RTC Control Connector RTC Battery Connector Connector size: WAFER-M-180-1.25mm Connector location: J4 PIN-M-180-2.54mm WAFER-M-180-1.25mm Definition Definition RTCRSTN RTC_CLR VBAT1 RTCGND# Copyright © 2011 NEXCOM International Co., Ltd. All rights reserved VMC 1000 User Manual... -
Page 35: Backlight Connector(Power)
Connector size: 1.25mm Wafer 2 Pin 90 Connector size: 1mm Wafer 2Pin 90 Connector location: J10 Connector location: J8 WAFER-M-90-1.25mm WAFER-M-90-1mm Definition Definition Brightness Panel_backlight BK_EN Copyright © 2011 NEXCOM International Co., Ltd. All rights reserved VMC 1000 User Manual... -
Page 36: Ccd Conector
Connector size: 1mm Wafer 10 Pin 90 Connector location: J3 Connector location: J9 WAFER-M-90-1mm WAFER-M-90-1mm Definition VCC3_S VCC3_S Definition LPC_AD0 CCD_PWR LPC_AD1 HUSB_9N LPC_AD2 HUSB_9P LPC_AD3 LPC_FRAME# CCD_EN_L LPC_CLK2 SIO_RST# Copyright © 2011 NEXCOM International Co., Ltd. All rights reserved VMC 1000 User Manual... -
Page 37: Mini Pcie Connector
UIM_RESET REFCLK- UIM_CLK GND6 UIM_DATA CLKREQ# UIM_PWR +3.3C_MINI COEX2 1.5V_3 COEX1 GND12 WAKE# 3.3VSB_3 Definition Definition +3.3C_MINI D15VS D15VS SATA_TXP1 SATA_RXN1 +3.3C_MINI D15VS SATA_TXN1 SATA_RXP1 +3.3C_MINI Copyright © 2011 NEXCOM International Co., Ltd. All rights reserved VMC 1000 User Manual... - Page 38 Definition Definition PCIE_WAKE# MINICARD1_DIS# +3.3B_MINI D15VS WLAN_RESET# D15VS SMB_CLK mPCIE_RX_N mPCIE_TX_N +3.3B_MINI D15VS SMB_DATA mPCIE_RX_P PRE-DEC CLKREQ# mPCIE_TX_P +3.3B_MINI USB_IN MC_PCIE_CLK_N USB_IP MC_PCIE_CLK_P +3.3B_MINI +3.3B_MINI LED_WLAN# Copyright © 2011 NEXCOM International Co., Ltd. All rights reserved VMC 1000 User Manual...
- Page 39 MINI PCIE Connector Interface: USB ONLY Connector location: CN4 Definition Definition Definition Definition 3.5G_DIS# +3.3A_MINI MINI_RXD_PCMDOUT_NC SMS_RI_3.5G MINI_TXD_PCMSY_NC UMTS_GND UMTS_RESET# +3.3A_MINI UIM_PWR2 UIM_DAT2 USB_3N VCC_MSM26_DIG UIM_CLK2 USB_3P +3.3A_MINI UIM_RST2 +3.3A_MINI 3.5G_LED# Copyright © 2011 NEXCOM International Co., Ltd. All rights reserved VMC 1000 User Manual...
-
Page 40: Gal Download Connector
Input Voltage Control Switch Connector size: 2.54mm PIN HEADER 6Pin 180 Connector size: 2x2 DIP SWITCH 180 Connector location: JP2 Connector location: SW3 PIN-M-180-2.54mm Definition Definition V3P3_G POWERSW 12V24V Copyright © 2011 NEXCOM International Co., Ltd. All rights reserved VMC 1000 User Manual... -
Page 41: Power_In Connector
Connector size: 2.5mm Wafer 6 Pin 180 Connector location: J12 WAFER-M-180-1.0mm Definition Definition IGNITION V_IN V_IN V_GND V_IN V_GND V_IN V_GND V_IN V_GND V_IN V_GND V_IN V_GND IGNITION V_GND Copyright © 2011 NEXCOM International Co., Ltd. All rights reserved VMC 1000 User Manual... -
Page 42: Chapter 3: System Setup
The Mini PCI Express slot shown below is used to install a WLAN module or 3.5G commu-nication module such as GPRS, UMTS or HSDPA module. For 3.5G module For WLAN module mSATA Copyright © 2011 NEXCOM International Co., Ltd. All rights reserved VMC 1000 User Manual... -
Page 43: System Setup
And then attach RF cable to the module. 4. Before you install the rear cover, please check the all thermal pads are on the heatsink. Copyright © 2011 NEXCOM International Co., Ltd. All rights reserved VMC 1000 User Manual... -
Page 44: Appendix A: I/O Address Function
Bit 2 Ignition (read only) 0: OFF 1: ON Bit 3 Status of Car Battery 0: Car Battery is OK 1: Car Battery is Low voltage Copyright © 2011 NEXCOM International Co., Ltd. All rights reserved VMC 1000 User Manual... - Page 45 Wake on 3.5G module 0: Disable 1: Enable (*) Bit 5 Wake on RTC module 0: Disable 1: Enable (*) Auto clear WDT timer when reading/writing I/O port 0EE5H. Copyright © 2011 NEXCOM International Co., Ltd. All rights reserved VMC 1000 User Manual...
- Page 46 Shutdown Bit 2~0 Time (sec) 12.5V 20 sec Startup Shutdown 1 min 12.5V 11.5V 5 min 10 min 30 min 1 hour 6 hour 18 hour Copyright © 2011 NEXCOM International Co., Ltd. All rights reserved VMC 1000 User Manual...
- Page 47 Input Voltage 24V Startup Shutdown Startup Shutdown Using end byte to tell the data flow end Startup Shutdown Data End byte (Delay time)(Startup/Shutdown voltage setting) Startup Shutdown Copyright © 2011 NEXCOM International Co., Ltd. All rights reserved VMC 1000 User Manual...
- Page 48 Bit0~7: the hour value(binary) I/O port: 0EEFH( User setting Time) Bit0~7: the minute value(binary) GAL Download control I/O port : 0EEBH Restart the Setup Command Enable byte Copyright © 2011 NEXCOM International Co., Ltd. All rights reserved VMC 1000 User Manual...
- Page 49 Appendix A: I/O Address Function GPIO I/O port : 0EE4H, Default Value : 0x38H Function Description Bit 0-2 GPO 0-2 Bit 3-5 GPI 0-2 Copyright © 2011 NEXCOM International Co., Ltd. All rights reserved VMC 1000 User Manual...
-
Page 50: Appendix B: Vehicle Power Management Setup
Appendix B: Vehicle Power Management Setup Appendix B: Vehicle Power Management Setup External Power Output Setting External +12V and +5V Turn On Simultaneously External +12V and +5V Turn Off Simultaneously Copyright © 2011 NEXCOM International Co., Ltd. All rights reserved VMC 1000 User Manual... -
Page 51: Vehicle Power Management Setup
Appendix B: Vehicle Power Management Setup Vehicle Power Management Setup External Power Output Setting External +12V Turn On Only External +5V Turn On Only Copyright © 2011 NEXCOM International Co., Ltd. All rights reserved VMC 1000 User Manual... - Page 52 12.5V and the shutdown voltage to 11.5V. If the input voltage setting is 12V : set the startup voltage to 12.5V and the shutdown voltage to 11V. Copyright © 2011 NEXCOM International Co., Ltd. All rights reserved VMC 1000 User Manual...
- Page 53 25V and the shutdown voltage to 22V. If the input voltage setting is 24V : set the startup voltage to 25V and the shutdown voltage to 23V. Copyright © 2011 NEXCOM International Co., Ltd. All rights reserved VMC 1000 User Manual...
- Page 54 Appendix B: Vehicle Power Management Setup Vehicle Power Management Setup Startup and Shutdown Voltage Setting If the input voltage setting is 6v~36V ignore the startup/shutdown setting. Copyright © 2011 NEXCOM International Co., Ltd. All rights reserved VMC 1000 User Manual...
- Page 55 Appendix B: Vehicle Power Management Setup Vehicle Power Management Setup Power-on Delay Setting Disable Power-on Delay Enable Power-on Delay Delay time can be set at 10sec/30sec/1min./5min./10min./15min./30min./ 1hour. Copyright © 2011 NEXCOM International Co., Ltd. All rights reserved VMC 1000 User Manual...
- Page 56 Appendix B: Vehicle Power Management Setup Vehicle Power Management Setup Power-on Delay Setting Disable Power-off Delay Enable Power-off Delay Delay time can be set at 20sec/1min./5min./10min./30min./1hour/6hour/ 18hour. Copyright © 2011 NEXCOM International Co., Ltd. All rights reserved VMC 1000 User Manual...
-
Page 57: Appendix C: Power Consumption
2. Get system into suspend mode and measure power consumption. Unit Idle Mode 100% Burn-in Mode DUT#1 1.3A 1.33A 148mA 12mA 12mA 72mA 56.7mA 56.7mA DUT#2 1.33A 1.35A * Device: N/A Copyright © 2011 NEXCOM International Co., Ltd. All rights reserved VMC 1000 User Manual... -
Page 58: Appendix D: Sms Wake-Up Setting
(1) Press <Enter> on “BIOS Setting” of the main menu screen. (3) Change the value to “Enable” for “3.5G Module” and “Wake On 3.5G (2) Select “Module Management” Module” Copyright © 2011 NEXCOM International Co., Ltd. All rights reserved VMC 1000 User Manual... - Page 59 (2) In the “Ports (COM & LPT)” section, you will find a port labeled “Sierra Wireless AT Command Port (UMTS)”, followed by a COM port number such as COM11. Copyright © 2011 NEXCOM International Co., Ltd. All rights reserved VMC 1000 User Manual...
- Page 60 (5) Select the COM port to which the modem is connected (use COM11 in this sample) in the “Connect using” field, and click “OK”. (6) Select these port settings, and click “OK”. Copyright © 2011 NEXCOM International Co., Ltd. All rights reserved VMC 1000 User Manual...
- Page 61 (11) Select the COM port to which the modem is connected (use COM6) in the “Connect using” field, and click “OK”. (12) Select these port settings, and click “OK” Copyright © 2011 NEXCOM International Co., Ltd. All rights reserved VMC 1000 User Manual...
- Page 62 04” and “OK”. (It mean the setting is completed) the “Connect using” field, and click “OK Note. SMS wake-up function only works in S3, S4 or S5 mode and the ignition off. Copyright © 2011 NEXCOM International Co., Ltd. All rights reserved VMC 1000 User Manual...
- Page 63 Appendix D: SMS Wake-up setting (3) Enter the “at!entercnd=”A710”, and the response would be “OK”. (5) Restart your computer. (4) Enter the “at!mapuart=0”, and the response would be “OK”. Copyright © 2011 NEXCOM International Co., Ltd. All rights reserved VMC 1000 User Manual...
-
Page 64: Appendix E: Rtc Wake-Up Setting
(1) Press <Enter> on “BIOS Setting” of the main menu screen. (3) Change the value to “Enable” for “Wake On RTC Module” (2) Select “Module Management” Copyright © 2011 NEXCOM International Co., Ltd. All rights reserved VMC 1000 User Manual... - Page 65 “Enter” on “Save Changes and Reset” Note. SMS wake-up function only works in S3, S4 or S5 mode and the ignition off. Copyright © 2011 NEXCOM International Co., Ltd. All rights reserved VMC 1000 User Manual...
Need help?
Do you have a question about the VMC 1000 and is the answer not in the manual?
Questions and answers