1. Manuals
  2. Brands
  3. Nexcom Manuals
  4. Automobile Accessories
  5. VTC 7120-BK Series
  6. User manual

Nexcom VTC 7120-BK Series User Manual

Vehicle telematics computer
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
NEXCOM International Co., Ltd.
Mobile Computing Solutions
Vehicle Telematics Computer
VTC 7120-BK Series
User Manual
NEXCOM International Co., Ltd.
www.nexcom.com
Published November 2013

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VTC 7120-BK Series and is the answer not in the manual?

Questions and answers

Related Manuals for Nexcom VTC 7120-BK Series

Summary of Contents for Nexcom VTC 7120-BK Series

  • Page 1 NEXCOM International Co., Ltd. Mobile Computing Solutions Vehicle Telematics Computer VTC 7120-BK Series User Manual NEXCOM International Co., Ltd. www.nexcom.com Published November 2013...

  • Page 2: Table Of Contents

    CMOS Clear Select ................20 Power Button ..................6 RS232 – Enable Select ...............20 Power On & SSD or HD Active LED ............6 LVDS Power input Voltage Select ............20 Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7120-BK Series User Manual...
  • Page 3 COM Express Row C and Row D ............37 Appendix C: Signal Connection of DI/DO Chapter 4: Mechanical Dimensions GPIO Pinout Description ................61 VTC 7120-BK ..................40 Digital Input ..................61 Digital Output ..................62 Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7120-BK Series User Manual...
  • Page 4 J1708 Packaged Messages Protocol ............77 J1708 Command Example ..............81 Appendix E: Pin Definition for GPS Dead Reckoning Module -- VIOB-GPS-DR01 S2532DR Overview ................82 Technical Specifications .................82 Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7120-BK Series User Manual...

  • Page 5: Preface

    The information in this document is subject to change without prior notice designed to provide reasonable protection against harmful interference when and does not represent commitment from NEXCOM International Co., Ltd. the equipment is operated in a commercial environment. This equipment...

  • Page 6: Rohs Compliance

    0.1% or 1,000ppm, and Polybrominated diphenyl Ethers (PBDE) < 0.1% or 1,000ppm. In order to meet the RoHS compliant directives, NEXCOM has established an engineering and manufacturing task force in to implement the introduction of green products. The task force will ensure that we follow the standard...

  • Page 7: Warranty And Rma

    ▪ Replace with 3rd party products if needed. ▪ Customers must collect all the information about the problems ▪ If RMA goods can not be repaired, NEXCOM will return it to the customer encountered and note anything abnormal or, print out any on-screen without any charge.

  • Page 8: Installation Recommendations

    There is a danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Discard used batteries according to the manufacturer’s instructions. viii Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7120-BK Series User Manual...
  • Page 9 ▪ The computer is provided with CD drives that comply with the appropriate ▪ All cautions and warnings on the equipment should be noted. safety standards including IEC 60825. Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7120-BK Series User Manual...

  • Page 10: Technical Support And Assistance

    Preface Technical Support and Assistance Conventions Used in this Manual 1. For the most updated information of NEXCOM products, visit NEXCOM’s Warning: website at www.nexcom.com. Information about certain situations, which if not observed, can cause personal injury. This will prevent injury to yourself 2.

  • Page 11: Global Service Contact Information

    Shanghai, 200062, China Wuhan, 430070, China Tel: +886-4-2249-1179 Tel: +86-21-6150-8008 Tel: +86-27-8722-7400 Fax: +886-4-2249-1172 Fax: +86-27-8722-7400 Fax: +86-21-3251-6358 Email: sales@nexcom.com.tw Email: sales@nexcom.cn Email: sales@nexcom.cn www.nexcom.com.tw www.nexcom.cn www.nexcom.cn Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7120-BK Series User Manual...

  • Page 12: United Kingdom

    Fax: +44-1908-262042 Email: sales.fr@nexcom.eu Email: sales.uk@nexcom.eu www.nexcom.eu www.nexcom.eu Germany NEXCOM GmbH Leopoldstraße Business Centre, Leopoldstraße 244, 80807 Munich, Germany Tel: +49-89-208039-278 Fax: +49-89-208039-279 Email: sales.de@nexcom.eu www.nexcom.eu Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7120-BK Series User Manual...

  • Page 13: Package Contents

    Preface Package Contents Before continuing, verify that the VTC 7120-BK series package that you received is complete. Your VTC 7120-BK series package should have all the items listed in the following table. Item Name Specification 50311F0110X00 (H)Flat Head Screw Long FEI:F3x5ISO+NYLOK NIGP...

  • Page 14: Ordering Information

    Preface Ordering Information The following provides ordering information for VTC 7120-BK series. • VTC 7120-BK (P/N: 10V00712000X0) Intel Celeron 847E 1.1GHz, 2GB DDR3 SODIMM, LVDS/ VGA ® ® Output, 1x RS-232, 1x RS-422/485 Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved.

  • Page 15: Chapter 1: Product Introduction

    GPS connector SSD1 CFast LAN1 LAN2 DC input 9V~36V Power button SIM card sockets Line-out2 USB COM2 GPIO DC output Mic-in2 LED indicators Reset button Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7120-BK Series User Manual...

  • Page 16: Overview

    NEXCOM’s other in-vehicle computer products. The GPS function navigates drivers to ultimate fleet management. Optional 802.11b/g/n, 3.5G, GPRS, and Bluetooth availability make VTC 7120-BK series ready for wider coverage and future trend. Multiple display connections make VTC 7120-BK series an ideal choice for in-vehicle signage platforms as well.

  • Page 17: Hardware Specifications

    I/O Interface-Front ▪ 1x G Sensor ▪ 1x Line-out, 1x Mic-in (for WWAN CM8000 voice communication) Note: If PCI-104 installation is needed, please contact NEXCOM for further information. ▪ 2x SIM card socket (selectable) ▪ 1x System reset button Power Management ▪...
  • Page 18 ▪ If the ignition is turned off again and the power-on delay ended (in BIOS process), VTC 71 series will shut down immediately. ▪ If VTC 71 series is off, only below 10mA is used. Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7120-BK Series User Manual...

  • Page 19: Connector Numbering

    Please note that connector numbers 6, 10, and 13 pinouts are not available. VTC 7120-BK           Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7120-BK Series User Manual...

  • Page 20: Chapter 2: External Connectors Pinout Description

    Power Button Power On & SSD or HD Active LED Connector Number: 1 Connector Number: 2 Definition Definition Function Description POWER LED +V3.3ALW HD LED VCC5_S Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7120-BK Series User Manual...

  • Page 21: Wlan & Wwan Active Led

    Chapter 2: External Connectors Pinout Description WLAN & WWAN Active LED USB 2.0 Port Connector Number: 2 Connector Number: 3 Definition Definition Function Description DATA1- WWAN LED DATA1+ WLAN LED Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7120-BK Series User Manual...

  • Page 22: Reset Button

    CLOCK SIGNAL vedC6 VPP:PROGRAM VOLTAGE Contact present switch NOTE: Only SIM CARD 1 (top side) can support SMS wake up function with CM8000 WWAN module. Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7120-BK Series User Manual...

  • Page 23: Cfast Card Connector

    Definition Definition Definition Definition FRONT_OUT_RC FRONT_JD SATA_TXP FRONT_OUT_LC SATA_TXN SATA_RXN SATA_RXP CFAST_CDI CFAST_LED1 CFAST_LED2 PC10 PC11 PC12 PC13 VCC3 PC14 VCC3 PC15 PC16 PC17 CFAST_CDO Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7120-BK Series User Manual...

  • Page 24: Mic-In

    Chapter 2: External Connectors Pinout Description Mic-in Mic-in2, Line-out2 Connector Number: 8 Connector Number: 9 Definition Definition Definition Definition LINE_OUT_L SURR_JD MIC_JD LINE_OUT_R MIC_OUT-L MIC_JD MIC_OUT Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7120-BK Series User Manual...

  • Page 25: Rs232 Connector

    LCDD06(CLK#) LCDD02(OUT1#) LVDS_GND LCDD_GND LCDD05(OUT2) Power on push button LCDD04(OUT2#) Panel_backlight LCDD_GND Panel-Gnd USB_0# Contact_DET# USB_0 USB_VCC NOTE: maximum resolution up to 1280x768 @ 60Hz Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7120-BK Series User Manual...

  • Page 26: Lan Connectors

    LAN Connectors USB Connector Connector size: RJ-45 Connector Number: 15 Connector Number: 14 Definition Definition Definition Definition DATA1- N/C1 DATA1+ N/C2 DATA- N/C3 N/C4 DATA+ Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7120-BK Series User Manual...

  • Page 27: Rs422/485 Connector

    Connector Number: 16 Connector Number: 17 Definition Definition Definition Definition GREEN RS422_RX+ / RS485_+ RS422_RX- / RS485_- BLUE RS422_TX+ RS422_TX- DDCDAT Hsync Vsync DDCCLK OPEN Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7120-BK Series User Manual...

  • Page 28: Gpio Connector

    Definition Definition Definition INPUT_1 PORT INPUT_2 PORT Car battery(4A) VCC12(4A) INPUT_3 PORT INPUT_4 PORT SMBCLK OUTPUT_1 PORT SMBDATA OUTPUT_2 PORT / OUTPUT_3 PORT OUTPUT_4 PORT Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7120-BK Series User Manual...

  • Page 29: Power Input

    Chapter 2: External Connectors Pinout Description Power Input Connector size: 3W3 3PIN 6.85mm DIP Connector Number: 23 Definition IGNITION Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7120-BK Series User Manual...

  • Page 30: Chapter 3: Jumpers And Switches

    Chapter 3: Jumpers and Switches This chapter describes how to set the jumpers on the motherboard. Note dry environments. A grounding strap is warranted whenever danger of that the following procedures are generic for all VTC 7120-BK series. static electricity exists. Before You Begin Precautions ▪...

  • Page 31: Jumper Settings

    (on) and open (off). Two-Pin Jumpers: Open (Left) and Short (Right) Three-Pin Jumpers: Pins 1 and 2 are Short Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7120-BK Series User Manual...
  • Page 32 The figure below is the carrier board which is the board used in the system. It shows the locations of the jumpers and connectors. Top View Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7120-BK Series User Manual...

  • Page 33: Bottom View

    Chapter 3: Jumpers and Switches Bottom View Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7120-BK Series User Manual...

  • Page 34: Vtc 7120-Bk Jumpers Setting

    GPO1 PULL UP 5V Don’t Care SW4.3 GPO2 PULL UP 5V Don’t Care (1-3)(2-4) (*) Short +3.3V SW4.4 GPO3 PULL UP 5V Don’t Care (3-5)(4-6) Short Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7120-BK Series User Manual...

  • Page 35: Rs232 Connector

    Definition Definition LVDS_4(OUT2#) Panel_backlight(+12V) DCD1 RXD1 LVDS_GND Power on push buttom TXD1 DTR1 USB_2# USB_GND Gnd1 DSR1 USB_2 USB_VCC (+5V) RTS1 CTS1 USB_GND USB_GND Panel_backlight(+12V) Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7120-BK Series User Manual...

  • Page 36: Gps I-Pex Connector

    RF_IN_F CH_CLK_P HPDET_I CH_TX0_N DVI_I_DDC_D_R CH_TX0_P DVI_I_DDC_C_R CH_TX1_N CH_GND CH_TX1_P CH_GND CH_TX2_N CH_GND CH_TX2_P CH_GND CH_GND VGA1_HSYNC VGA1_RED VGA1_VSYNC VGA1_BLUE VGA1_DDCDAT VGA1_GREEN VGA1_DDCCLK M_DET VGA1_PWR_L Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7120-BK Series User Manual...

  • Page 37: Sata Pwr Connector

    Chapter 3: Jumpers and Switches SATA PWR Connector SATA Connector Connector location: CN16 Connector location: CN17 Definition Definition Definition Definition VCC12 SATA_TXP0 - SATA_TXN0 VCC5 SATA_RXN0 SATA_RXP0 Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7120-BK Series User Manual...

  • Page 38: Mini-Pcie (Wwan)

    Definition MIC + +V3.3S MIC - SPK + USIM PWR RESET USIM DATa USB_D- VCC_MSM26_DIG USIM CLK USB_D+ USIM RST +V3.3S +V3.3S LED_WWAN# W_DISABLE# +V3.3S Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7120-BK Series User Manual...

  • Page 39: Mini-Pcie (Wlan)

    Definition Definition WAKE# +V3.3S +V1.5S SMB_CLK +V1.5S PETn0 SMB_DATA CLKREQ# PETp0 USB_D- REFCLK- USB_D+ REFCLK+ LED_WWAN# LED_WLAN# DISABLE# LED_WPAN# PERST# +V1.5S PERn0 +3.3S PERp0 +V3.3S Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7120-BK Series User Manual...

  • Page 40: Connector

    CLK0 CLK1 +3.3V TRDY# DEVSEL# CLK2 CLK3 FRAME# IRDY# +3.3V INTD# RST# AD16 +3.3V C/BE2# +12V INTA# INTB# INTC# AD18 +3.3V AD17 -12V REQ3# GNT3# Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7120-BK Series User Manual...

  • Page 41: Mcu Programmer Pin Header

    Chapter 3: Jumpers and Switches MCU Programmer PIN Header MCU COM Port Connector location: JP2 Connector location: JP3 Definition Definition Function Description +3.3ALW MRST C2CK Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7120-BK Series User Manual...

  • Page 42: Gal Programmer Pin Header

    Chapter 3: Jumpers and Switches GAL Programmer PIN Header Super I/O Temperature Sensor Connector location: JP4 Connector location: JP5 Function Description Definition Definition SENSOR+ VCC3 Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7120-BK Series User Manual...

  • Page 43: Mcu Temperature Sensor

    Chapter 3: Jumpers and Switches MCU Temperature Sensor LVDS Power Connector Connector location: JP7 Connector location: J8 Function Description Definition Definition SENSOR+ Panel_backlight Panel_VDD LVDS_PANEL LVDS_BIASON Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7120-BK Series User Manual...

  • Page 44: Gps Connector

    LPC_AD2 LPC_AD1 LPC_AD0 NOTE: Onboard uBlox NEO-6Q GPS module can’t be used with optional GPS dead reckoning module VCC3 VCC3 (VIOB-GPS-DR01) at the same time. Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7120-BK Series User Manual...

  • Page 45: Bluetooth Connector

    Chapter 3: Jumpers and Switches Bluetooth Connector Button Power Connector location: J11 Connector location: J13 Definition Definition Function Description USB_6P_L USB_6N_L 3.3V BT_AUDIO_EN_R BT_3.3V Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7120-BK Series User Manual...

  • Page 46: Rtc Battery Connector

    Chapter 3: Jumpers and Switches RTC Battery Connector Connector location: J14 Definition Definition VBAT1 Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7120-BK Series User Manual...

  • Page 47: Hi-Speed Board To Board Connector

    MINI_CLKN3 MINI_CLKN4 PCIE_TXP2 PCIE_RXP2 PCIE_TXN2 PCIE_RXN2 PCIE_TXP3 PCIE_RXP3 PCIE_TXN3 PCIE_RXN3 SATA_TXP2 SATA_RXP2 SATA_TXP2 SATA_RXN2 USB_7P_L LPC_AD0 USB_7N_L LPC_AD1 LPC_AD2 SMB_DATA LPC_AD3 SMB_CLK LPC_FRAME# SIO_CLK CB_RESET# Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7120-BK Series User Manual...

  • Page 48: High Speed Board-To-Board Connector: Com Express Row A And Row B

    Row B Definition Definition Definition Definition GBE0_MDI3- GBE0_ACT# GBE0_MDI3+ LPC_FRAME# LPC_AD0 GBE0_MDI2- LPC_AD1 LPC_AD2 GBE0_MDI2+ GBE0_LINK# LPC_AD3 GBE0_MDI1- GBE0_MDI1+ LPC_CLK GBE0_MDI0- PWRBTN# GBE0_MDI0+ GBE0_CTREF SMB_CK SMB_DAT Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7120-BK Series User Manual...
  • Page 49 USB_6_7_OC# USB_4_5_OC# USB4- USB4+ USB5- USB5+ USB2- USB3- USB2+ USB_2_3_OC# USB3+ USB_0_1_OC# USB0- USB0+ USB1- USB1+ VCC_RTC SYS_RESET# CB_RESET# GPI1 GPO3 PCIE_TX0+ PCIE_RX0+ PCIE_TX0- PCIE_RX0- Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7120-BK Series User Manual...
  • Page 50 VCC_12V B104 VCC_12V A105 VCC_12V A106 VCC_12V B105 VCC_12V B106 VCC_12V A107 VCC_12V A108 VCC_12V B107 VCC_12V B108 VCC_12V A109 VCC_12V A110 B109 VCC_12V B110 Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7120-BK Series User Manual...

  • Page 51: High Speed Board-To-Board Connector: Com Express Row C And Row D

    Definition IDE_D7 IDE_D5 IDE_D6 IDE_D3 IDE_D10 IDE_D11 IDE_D15 IDE_D8 IDE_D12 IDE_D4 IDE_D9 IDE_D2 IDE_D0 IDE_REQ IDE_D13 IDE_D1 IDE_IOW# IDE_ACK# IDE_D14 IDE_IRQ IDE_IORDY IDE_IOR# IDE_A0 IDE_A1 Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7120-BK Series User Manual...
  • Page 52 PCI_AD26 PCI_AD28 PCI_AD25 PCI_AD27 PCI_AD30 PCI_IRQC# PCI_AD29 PCI_AD31 PCI_IRQD# PCI_CLKRUN# PCI_IRQA# PCI_IRQB# PCI_M66EN PCI_CLK PEG_RX0+ SDVOB_RED+ PEG_RX0- SDVOB_RED- PEG_LANE_RV# SDVOB_GREEN+ SDVOB_GREEN- SDVOB_BLUE+ SDVOB_BLUE- SDVO_CLK+ SDVO_CLK- Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7120-BK Series User Manual...
  • Page 53 D103 D104 VCC_12V C105 VCC_12V C106 VCC_12V D105 VCC_12V D106 VCC_12V C107 VCC_12V C108 VCC_12V D107 VCC_12V D108 VCC_12V C109 VCC_12V C110 D109 VCC_12V D110 Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7120-BK Series User Manual...

  • Page 54: Chapter 4: Mechanical Dimensions

    Chapter 4: Mechanical Dimensions Chapter 4: Mechanical Dimensions VTC 7120-BK 286.40 274.40 260.00 260.00 Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7120-BK Series User Manual...

  • Page 55: Chapter 5: System Setup

    Prior to removing the chassis cover, make sure the unit’s power CAUTION! CAUTION! CAUTION! is off and disconnected from the power sources to prevent electric shock or system damage. Bottom View Front View Rear View Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7120-BK Series User Manual...

  • Page 56: Installing A Gprs/Umts/Hsdpa Module

    1. When you want to install the Mini PCI Express card, you have to remove 2. Remove the SSD bracket. the SSD tray and bracket. First, remove the SSD tray. Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7120-BK Series User Manual...
  • Page 57 GPRS, UMTS or HSDPA module. disappears inside the slot. Mini PCI GPRS/UMTS/ Express slot HSDPA module Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7120-BK Series User Manual...
  • Page 58 5. Push the module down then secure it with mounting screws. 6. Attach one end of the RF cable onto the module. Attach RF cable to the modul Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7120-BK Series User Manual...
  • Page 59 Chapter 5: System Setup 7. Mount the other end of the cable to the antenna mounting hole located at the front panel of the chassis. Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7120-BK Series User Manual...

  • Page 60: Installing A Wireless Lan Module

    Mini PCI Express slot Wireless LAN module Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7120-BK Series User Manual...
  • Page 61 3. Push the module down then secure it with mounting screws. 4. Attach one end of the RF cable onto the module. Attach RF cable to the module Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7120-BK Series User Manual...

  • Page 62: Installing A Sata Ssd Drive

    Chapter 5: System Setup Installing a SATA SSD Drive 1. Remove the SSD tray. 2. Place the SDD drive into the tray and then tighten the four screws. Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7120-BK Series User Manual...
  • Page 63 Chapter 5: System Setup 3. Install the HDD tray, and then tighten the screws to secure the drive to the chassis. Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7120-BK Series User Manual...

  • Page 64: Rackmount Brackets

    1. The mounting holes are located at the bottom of the system. Secure the brackets on each side of the system using the provided mounting screws. Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7120-BK Series User Manual...

  • Page 65: Chapter 6: Driver Installation

    Chapter 6: Driver Installation Chapter 6: Driver Installation When you want to install the VTC 7120-BK series driver, please refer to the following steps, it will help you with the driver installation. Note: Please change the path according to the product name.

  • Page 66: Software Demo Utility For I/O Ports Of Function Control

    Appendix A: Software Demo Utility for I/O Ports of Function Control Appendix A: Software Demo Utility for I/O Ports of Function Control NEXCOM’s software demo utility enables users to test and control different I/O port functions on the VTC 7120-BK. This document shows how to use the utility.

  • Page 67: 1.1 Status

    Low voltage …… Signal of ignition is high. OFF ..…..Signal of ignition is low. 1.1.3 Input Voltage Shows the setting of input voltage in BIOS. Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7120-BK Series User Manual...

  • Page 68: 1.3 Wdt Setting

    WDT can also be cleared by button. Enables or Disables the output of 12VDC. 1.4.2 Bypass Car Battery Power Reads the status of GPI. Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7120-BK Series User Manual...

  • Page 69: 1.5 Power On Delay Time

    Enables or disables the power off delay time function. There are 8 selections Enables or disables WLAN function for the WLAN module on mini-PCIe of delay time. socket (CN19). Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7120-BK Series User Manual...

  • Page 70: 1.9 Wake Up Function

    Enables or disables the wake up function for the WWAN module on mini-PCIe socket (CN18). 1.9.2 RTC Enables or disables the RTC wake up function. The timer setting of RTC is located in BIOS setting. Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7120-BK Series User Manual...

  • Page 71: Appendix B: Using The Gps Feature

    Hot starts: 1s 1. Go to Device Manager to ensure the device is installed correctly. Sensitivity Tracking: –162 dBm Cold starts: –148 dBm Hot starts: –157 dBm Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7120-BK Series User Manual...
  • Page 72 3. Follow the given instructions to complete the installation. 5. Once the installation is completed, installation of GPS Information onto PDA device will be launched automatically. Select <Yes> to continue. Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7120-BK Series User Manual...
  • Page 73 Blue circle indicates that is being tracked and is being used in the cur- • VTG data output for during operation. Check the box to activate the rent position. VTG data output. Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7120-BK Series User Manual...
  • Page 74 • “Position Accuracy” - Range from 0.5 to 99.9, the smaller the better • “Longitude” – Display current longitude in E/W (East/West Hemisphere) Time (hhmmss) Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7120-BK Series User Manual...

  • Page 75: Appendix C: Signal Connection Of Di/Do

    The CN18 has 4 digital input channels. Dry Contact (default) The GPI signals have a pull up resistor to 5V internally. Wet Contact: Please contact sales for further information. Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7120-BK Series User Manual...

  • Page 76: Digital Output

    DIP SW 2X4 DIP SW 2X4 G_OUT1 GPO (SW4) GPO0 Pull up VCC5 G_OUT2 Don’t Care GPO1 EMB17A03G EMB17A03G G_OUT3 GPO2 G_OUT4 GPO3 EMB17A03G EMB17A03G Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7120-BK Series User Manual...
  • Page 77 SIO-F-90-5.08mm SIO-F-90-5.08mm Resistor G_IN1 Input G_OUT1 GPO1 G_IN2 EMB17A03G EMB17A03G G_OUT2 G_IN3 External Device G_OUT3 G_IN4 G_OUT3 G_OUT4 GPO2 G_OUT4 CN18 GPO3 GPIO_GND EMB17A03G EMB17A03G Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7120-BK Series User Manual...

  • Page 78: Appendix D: Obdii Module Setup And Command

    AT command. Please refer the following section command and then press the return key: of AT command. >ATR or >AT R (spaces are optional; and case is in-sensetive). Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7120-BK Series User Manual...

  • Page 79: At Command Summary

    Byte N:Vehicle ID byte N J1939: 00~99. Byte N+1: Check Sun= Byte1+Byte2 +…..ByteN EX: AT#01 , to get speed high byte. Byte N+1:0x0D Byte N+2:0x0A N: Max 35 Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7120-BK Series User Manual...

  • Page 80: Simple Data Protocol: (Ascii Code)

    Byte 19 Distance : D1 Byte 20 , Byte 21 Distance: D2 Byte 22 , Byte 23 FU, Average Fuel Economy (km/L) =Fu /10 Byte 24 , Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7120-BK Series User Manual...

  • Page 81: Simple Data Protocol: (Hex Code)

    0: Cruise Control (ON/OFF) unavailable 1: Cruise Control (ON/OFF) available Bit 0: 0: NORMAL 1: DTC ON 2.) Distance = D1*256+D2 3.) Average Fuel Economy =Fu /10 Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7120-BK Series User Manual...

  • Page 82: J1939 Raw Data Protocol (Hex Code)

    Byte 13 Check Sum Byte 14 0x0D Byte 15 0x0A MID=128 0x40 0x80 0x15 0x01 0x32 0xC8 0x0D 0x0A PID=21 (Engine ECU temperature) Data=50 Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7120-BK Series User Manual...

  • Page 83: J1939 Packaged Messages Protocol

    RPM= (RH*256+ RL)* 0.125 4. This is the common J1939 measurement overview showing which measurements are available. Note that not all measurements are supported by the individual engines. Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7120-BK Series User Manual...
  • Page 84 =((D4*256*256*256)+(D3*256*256)+(D2*256)+D1)*0.005 (KM) Axle location Bit-mapped position vehicle travel number counting front to back facing #33 D1 forward. #34 D2 Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7120-BK Series User Manual...
  • Page 85 0100 = 9 h reached 0101 = 15 min bef. 16 h #44 VS2 0110 = 16h reached 1110 = Error 1111 = not available Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7120-BK Series User Manual...
  • Page 86 01= request is supported enabled→door can be opened by a passenger 10 = reserved 11 = don´t care Bit4~Bit7:Resvered Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7120-BK Series User Manual...
  • Page 87 10 = error 10 = error 10 = error 11 = not available 11 = not available 11 = not available 11 = not available Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7120-BK Series User Manual...
  • Page 88 Information of the pressure of the air suspension bellow at the left 1100–1110 = Reserved side of the 1111 = not available front axle Pressure= ((BPRAR2*256)+BPRAR1)* 0.1 ,KPA Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7120-BK Series User Manual...
  • Page 89 1010 = Cond. Yellow 1011 = Cond. Info 1011 = Cond. Info 1100–1110 = Reserved 1100–1110 = Reserved 1111 = not available 1111 = not available Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7120-BK Series User Manual...
  • Page 90 Bit 7,6,5,4: Telltale Status 13 1000 = off 1001 = Cond. Red 1010 = Cond. Yellow 1011 = Cond. Info 1100–1110 = Reserved 1111 = not available Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7120-BK Series User Manual...

  • Page 91: J1708 Packaged Messages Protocol

    Byte 22: 0X0A Byte 22: 0X0A Byte 22: 0X0A Bits 4-1: Failure mode identifier (FMI) NOTE : The #00~#52 command respond that data are ASCII code. Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7120-BK Series User Manual...
  • Page 92 100% is full supply. Bit 1: 1 = Left wheel, 0 = Right wheel Maximum Range: 0.0 to 102.0% TP= data * 0.4% Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7120-BK Series User Manual...
  • Page 93 If vehicle dose not provide TVD, AT1708 replace the information #27 hh with the calculated distance, deviation is 0.5%, The first time connection AT1708 please command ATR to clear distance memory. Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7120-BK Series User Manual...
  • Page 94 Maximum Range: 0.0 to 219.8 kPa (0.0 to 31.875 lbf/in2) Bit 8: 1=active/0=not active Bits 7-1: Undefined PB=data * 0.862 (KPA) Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7120-BK Series User Manual...

  • Page 95: J1708 Command Example

    1996 (T), 199 7(V), 1998 (W), 1999 (X), 2000 (Y), 2001(1), 2002 (2), 2003 (3)….. Production Plant The sequence of the vehicle for production as it rolled of the manufacturers Sequential Number 178227 assembly line. Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7120-BK Series User Manual...

  • Page 96: Appendix E: Pin Definition For Gps Dead Reckoning Module

    8,000,000 time-frequency hypotheses Storage Temperature -55 ~ +100oC per second, offering industry-leading signal acquisition and TTFF speed. Humidity 5% ~ 95% Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7120-BK Series User Manual...
  • Page 97 B. Connector location: J9 SP_RX1 GPS_BAT NOTE: Onboard uBlox NEO-6Q GPS module can’t be used with optional GPS dead reckoning module (VIOB-GPS-DR01) at the same time. Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. VTC 7120-BK Series User Manual...

Table of Contents