Table of Contents
Advertisement
Technical Data
Climatic Environmental Conditions
Storage Temperature:
Operating Temperature:
Permissible Humidity at Ann. Average:
Permissible Installation Altitude:
Degree of Protection EN 60529
HMI Front Panel with Seal:
Rear Side Terminals:
Routine Test
Insulation Test Acc. to IEC60255-5:
Aux. Voltage Supply, Digital Inputs,
Current Measuring Inputs, Signal Relay
Outputs:
Voltage Measuring Inputs:
All Wire-Bound Communication
Interfaces:
Housing
Housing B2: Height / Width
Housing Depth (Incl. Terminals):
Material, Housing:
Material, Front Panel:
Mounting Position:
Weight:
Use Copper conductors only, 75°C (167°F).
Conductor size AWG 14 [2.5 mm].
-30°C to +70°C (-22°F to 158°F)
-20°C to +60°C (-4°F to 140°F)
<75% rel. (on 56d up to 95% rel.)
<2,000 m (6,561.67 ft) above sea level
If 4,000 m (13,123.35 ft) altitude applies, a changed
classification of the operating and test voltages may be
necessary.
IP54
IP20
All tests to be carried out against ground and other input and
output circuits.
2.5 kV (eff.) / 50 Hz
3.0 kV (eff.) / 50 Hz
1.5 kV DC
183 mm (7.205 in.)/ 212.7 mm (8.374 in.)
208 mm (8.189 in.)
Aluminum extruded section
Aluminum/Foil front
Horizontal (±45° around the X-axis must be permitted)
Approx. 4.2 kg (9.259 lb)
EMR-4000
www.eaton.com
IM02602009E
829
Advertisement
Table of Contents
