Table of Contents
Advertisement
Parameter
Description
Printed Circuit
Printed Circuit Board
Board
There are two mounts available for the EMR-4000-2: a Standard Mount and a Projection Mount. To order the
EMR-4000-2 with a Standard Mount, append the device code with a zero (0). To order the EMR-4000-2 with a
Projection Mount, append the device code with a one (1). Refer to the table for details of the available device options.
EMR-4000-2 Eaton Motor Relay
Removable Terminals
Choose from the following options.
Hardware Option 1
8 DI, 5 Outputs, 4AO, Removable Terminals, Zone
Interlocking,URTD Interface, IRIG-B, Small Display.
Hardware Option 2
Phase Current 5A/1A, Ground Current 5A/1A, Power Supply
Range: 19-300 Vdc, 40-250 Vac.
Phase Current 5A/1A, Sensitive Ground Current 0.5A/0.1A,
Power Supply Range: 19-300 Vdc,
40-250 Vac.
Communication Options
Modbus-RTU (RS-485) + DNP3.0 (interface with terminals)
Modbus TCP + DNP3.0 (Ethernet 100MB / RJ45)
Modbus RTU + DNP3.0 (Fibre optic interface, ST connector)
DNP3.0 + Modbus RTU (RS485 / D-SUB interface)
IEC-61850 (Ethernet 100MB, RJ45)
Modbus-RTU (interface with terminals) + Modbus-TCP (Ethernet 100MB,
RJ45)
IEC61850 / Ethernet 100MB (Single LC connector)
Conformal Coating Options
None
Conformal Coated Circuit Boards
Mounting Options
Standard Mount
Projection Panel Mount
EMR-4000
Options
»A« Standard,
»B« Conformal Coating
EMR-4000-2
A
A
www.eaton.com
Default
Menu path
»A« Standard
[EMR-4000]
0
B
0 (Zero)
1
B
C
F
G
H
I
K
IM02602009E
A
1
A
B
0 (Zero)
1
24
Advertisement
Table of Contents
