Table of Contents
Advertisement
A relay output contact WILL NOT be disarmed as long as:
A relay output contact WILL NOT be disarmed if it is latched (and not yet
reset).
A relay output contact WILL NOT be disarmed as long as a running
t-OFF-delay timer is not yet expired (hold time of a relay output contact).
If the Disarm Control is not set to active.
If the Direct Command is not applied.
A relay output contact WILL be disarmed if it is not latched and:
If there is no running t-OFF-delay timer (hold time of a relay output
contact); and
If the DISARM Control is set to active; and
If the Direct Command Disarm is applied.
EMR-4000
www.eaton.com
IM02602009E
807
Advertisement
Table of Contents
