Eaton EMR-4000 Installation, Operation And Maintenance Manual page 311

Parameter Description
Scale Factor 2 The scale factor is used to convert the measured value in
an integer format
Dead Band 2 If a change of measured value is greater than the
deadband value it will be reported to the master.
Analog value 3 Analog value can be used to report values to the master
(DNP)
Scale Factor 3 The scale factor is used to convert the measured value in
an integer format
Dead Band 3 If a change of measured value is greater than the
deadband value it will be reported to the master.
Analog value 4 Analog value can be used to report values to the master
(DNP)
EMR-4000
Setting range
0.001,
0.01,
0.1,
1,
10,
100,
1000,
10000,
100000,
1000000
0.01 - 100.00%
1..n, TrendRecList
0.001,
0.01,
0.1,
1,
10,
100,
1000,
10000,
100000,
1000000
0.01 - 100.00%
1..n, TrendRecList
www.eaton.com
IM02602009E
Default Menu path
1 [Device Para
/DNP
/Point map
/Analog Input]
1% [Device Para
/DNP
/Point map
/Analog Input]
-.- [Device Para
/DNP
/Point map
/Analog Input]
1 [Device Para
/DNP
/Point map
/Analog Input]
1% [Device Para
/DNP
/Point map
/Analog Input]
-.- [Device Para
/DNP
/Point map
/Analog Input]
311