Table of Contents
Advertisement
Device taken out of Service "Device Stopped"
The protection device will be taken out of service, if there is an undefined state that cannot be escaped after three
reboots.
In this state the system LED will be illuminated red or red flashing. The display will show the message "Device Stopped"
followed by a 6-digit error code, e.g. E01487.
In addition to the recorders, messages and display information that can be accessed by the user, there may exist
additional error information accessible by the Service Staff. These offer further failure analysis and diagnosis
opportunities to the Service Staff.
In such a case please contact the Eaton Service Staff and provide them the
error code.
For further information on trouble shooting please refer to the separately
provided "Trouble Shooting Guide".
EMR-4000
www.eaton.com
IM02602009E
786
Advertisement
Table of Contents
