Edit Entries - Honeywell XLS80e Manual

FROM THE INPUT/OUTPUT DISPLAY:
EITHER:
SEE SECTION 7.6 FOR THE
Honeywell, Issue 9
March 2007
OR:
PROCEDURE
THE CONTROL MATRIX
ENTRY IS DELETED
XLS80e Fire Alarm Control Panels

7.5.2 Edit Entries

This option allows existing entries to be edited
or new entries to be created, and allows
existing entries to be deleted.
7.5.2.1 Amend or Create Entry
Press to edit the currently-displayed entry
(via the AMEND/DELETE options screen), or
to create a new entry.
YOU WILL NEED TO AMEND OR DELETE
THE DEFAULT ENTRIES (SECTION 7.1.1),
OTHERWISE THEY WILL OVERRIDE ANY
CREATED ENTRIES.
The top line of the display changes to either
'Amend Existing Control Matrix Entry' or
'Create New Control Matrix Entry', depending
upon the selection made. The examples given
in Section 7.6 all use the latter.
7.5.2.2 Delete Entry
Press to delete the currently-displayed
entry (via the AMEND/DELETE options
screen). To delete a delayed entry it is
necessary to delete both parts.
Note: When this display is reached the printer
logs the deletion. If you subsequently
press
CHANGES CANCELLED message.
62
, the printer prints an EDITED