Honeywell XLS80e Manual page 43

THEN
Honeywell, Issue 9
March 2007
XLS80e Fire Alarm Control Panels
5.1.2.8 LED Blink Options
Select whether the device's LEDs follow the
panel setting (Section 11.2) or are set to blink
or not (non-blink).
5.1.2.9 LED Also Controls
Select the required option:
a. NONE. There are no additional controls.
b. SOUNDER. For use with B601BH base
with integral sounder; the sounder will be
silenced by operation of the panel's
SILENCE/RESOUND (to silence) or
RESET pushbuttons.
c. Non-Sil. Control. Used when auxiliary
equipment is driven in parallel with the
sensor LED. Control of this auxiliary
equipment is then independent of the
SILENCE/RESOUND pushbutton - it is only
switched off by operating the RESET
pushbutton.
5.1.2.10 End the Editing Session
When all the changes have been made, press
to confirm them. The panel then uses the
changed parameters.
36