XLS80e Fire Alarm Control Panels
STATUS: NORMAL
USER MENU
4.4.3 Menu Structure
TEST
DISABLE/ENABLE
LOG/DISPLAY/
PRINT MENU
SET CLOCK
VIEW ALARM
COUNT
A
27
Note: ** Requires access 3 passcode. The
menu primarily used in this manual is
the Configuration Menu, therefore its
sub-menus are shown in greater detail
than is the case for the other menus.
*** Requires access 3A passcode.
+Only available if a PRN-ID printer is
configured.
^Only available if at least one SMART
sensor is configured on the loops.
ZONE WALK TEST
CONTROL OUTPUT/
SOUNDER TEST **
LAMP TEST
DAILY/WEEKLY AUTO
TEST NOW
MCS SENSORS
COMMISSIONING ^
ALARM INPUTS
BY ZONE
ALARM OUTPUTS
BY ZONE
INDIVIDUAL DEVICE
LOG/DISPLAY
DEVICE DATA
PRINT DEVICE
DATA
DISPLAY/PRINT
EVENT LOG
PRINTER
CONTROL +
DISPLAY BAD
POLL LOG ***
DISPLAY ACTIVE
C. MATRIX RULES **
UNCONFIGURED
DEVICES **
Honeywell, Issue 9
March 2007