Comp Mode Menu; Plan Mode Menu - Honeywell SPZ-8000 Maintenance Manual

MAINTENANCE
Honeywell !i!!!!!%h.
6. C. (4) COMP
Mode Menu
The COMP
function is comprised of the following items:
Bearing Pointer
Source Selection
. Wind Display
(5)
(a)
(b)
(c)
COMP Function Key Selection - Pressing the COMP key causes the
function key to be annunciated along with the COMP menu to be
displayed on the DCCRT (Figure 6-11). IftheND is in the MAP
or PLAN modes, the ND will configure to the COMP display
format.
Bearing Pointer Source Selection - The bearing pointer source
selection operation is the same as the MAP mode discussed in
paragraph 6.C.(3). Selections of bearing sources on this menu
also change the selections of bearing sources on the MAP menu,
and will be reflected on the MAP display if subsequently
selected.
WIND Display Selection - The WIND display format selection
operation is the same as the MAP mode discussed in paragraph
6.C.(3). Wind display selections made on this menu also change
the selections on the MAP mode menu, and will be reflected on
the MAP display if subsequently selected.
PLAN Mode Menu
The PLAN function is comprised of the following items:
. Flight Plan Scroll - FORE/BACK
. Map Declutter Options
. Wind Display
(a) PLAN Function Key Selection - Pressing the PLAN key causes the
function key to be annunciated along with the PLAN menu to be
displayed on the DCCRT (Figure 6-12). IftheND is in the MAP
or COMP modes, the ND will configure to the PLAN display
format.
22-14-00
Page 179
Aug 15/91
Use or disclosure of information on this page is subject to the restrictions on the title page of this document.