Throttle Valve Installation - KYMCO BET & WIN 50 Manual

12
. CARBURETOR/FUEL PUMP/
FUEL TANK
Remove the jet needle by removing the
needle clip.
Check the jet needle and throttle valve for
wear or damage.
THROTTLE VALVE
INSTALLATION
Install the jet needle on the throttle valve
and secure with the needle clip.
Install the rubber seal on the throttle cable
and then install the carburetor cap and
throttle valve spring.
Connect the throttle cable to the throttle
valve.
12-3
www.PlanDeGraissage.org
Needle Clip
Spring
Rubber Seal
Throttle
Valve
BET & WIN 50
Throttle
Valve
Jet Needle
Carburetor Cap
Throttle Valve Spring
Throttle Cable