Throttle Valve Installation - KYMCO ZX/SCOUT 50 Service Manual

11
. CARBURETOR
Remove the jet needle by removing the
needle clip.
Check the jet needle and throttle valve for
wear or damage.
THROTTLE VALVE
INSTALLA-TION
Install the jet needle on the throttle valve
and secure with the needle clip.
Install the rubber seal on the throttle cable
and then install the carburetor cap and
throttle valve spring.
Connect the throttle cable to the throttle
valve.
Jet Needle
Throttle Valve
Rubber Seal
Throttle Valve Spring
Throttle Valve
Throttle Cable
ZX / SCOUT
Needle Clip
Needle Retainer
2nd Notch (STD)
Carburetor Cap
11-4