Configure Date And Time - HP storageworks 2/32 Installation Manual

Using the Embedded Web Server
2. Click Activate to save the information. The message Your changes to

Configure Date and Time

Perform this procedure to configure the effective date and time for the switch. To
set the date and time:
1. At the Configure window, click the Switch tab, then select Date/Time tab.
Figure 38: Switch page—Date/Time tab
92
the identification configuration have been
successfully activated displays.
The Switch page displays with Date/Time tab selected (highlighted red)
(Figure 38).
a. Click the Date fields that require change, and type numbers in the
following ranges:
Month (MM): 1 through 12
Day (DD): 1 through 31
Year (YY): greater than 1980
b. Click the Time fields that require change, and type numbers in the
following ranges:
Hour (HH): 0 through 23
Minute (MM): 0 through 59
Second (SS): 0 through 59
Edge Switch 2/32 Installation Guide