Modify A Firmware Version Description - HP storageworks 2/32 Installation Manual

11. To send the firmware version to an edge switch, see

Modify a Firmware Version Description

Use these steps to modify the description of an edge switch firmware version in
the library stored on the HAFM server hard drive:
1. At the HAFM server, open the HAFM application. The Products View page
2. Double-click the icon representing the edge switch for which the firmware
3. Choose Maintenance > Firmware Library. The Switch Firmware Library
4. Choose the firmware version to be modified and click Modify. The Modify
Figure 48: Modify Firmware Description dialog box
5. Enter a modified description (up to 24 characters in length) for the firmware
6. The new description for the firmware version displays in the Switch
7. Click Close.
Edge Switch 2/32 Installation Guide
Version to a Switch" on page 108.
displays.
version description will be modified. The Hardware View page for the
selected edge switch displays.
dialog box displays, as shown in
Firmware Description dialog box displays, as shown in
version and click OK. It is recommended the description include the
installation date and text that uniquely identifies the firmware version.
Firmware Library dialog box.
"Download a Firmware
Figure 45.
Manage Firmware Versions
Figure 48.
107