HP storageworks 2/32 Installation Manual page 73

3. Enter a name from one to 64 characters in length. All characters in the ISO
4. Choose one of the following from the drop-down list under the Name field:
5. Click Next. A new screen displays with additional parameters, as shown in
Note:
Figure 26: New Threshold Alerts dialog box
6. Enter a percentage from 1 through 100 for % utilization. When throughput
Edge Switch 2/32 Installation Guide
Latin-1 character set, excluding control characters, are allowed.
■ Rx Throughput—An alert will occur if the threshold set for receive
throughput is reached
■ Tx Throughput—An alert will occur if the threshold set for transmit
throughput is reached.
■ Rx or Tx Throughput—An alert will occur if the threshold set for either
receive or transmit throughput is reached.
Figure 26. The name configured for the alert displays at the top of the screen.
Click Previous if you need to return to the previous screen.
reaches this percentage of port capacity, a threshold alert will occur.
Installing and Configuring the Edge Switch 2/32
second screen
—
73