Installing and Configuring the Edge Switch 2/32
Figure 13: Switch Hardware View page
4. Inspect switch status at the Hardware View page and perform one of the
48
following steps:
a. If the switch displays operational (no FRU alert symbols and a green
circle at the alert panel), go to
b. If switch operation displays degraded or a switch failure is indicated
(FRU alert symbols and a yellow triangle or red diamond at the alert
panel), refer to the HP StorageWorks Edge Switch 2/32 Service Manual to
isolate the problem.
"Set Switch Date and
Edge Switch 2/32 Installation Guide
Time" on page 49.