Switch Page—Network Tab - HP storageworks 2/32 Installation Manual

Using the Embedded Web Server
2. At the Configure window, click the Switch tab, then click the Network tab.
Figure 41: Switch page—Network tab
3. Click Activate to save the information. The following message box displays
Figure 42: Network configuration changes activated
98
The Switch page displays with the Network tab selected
a. At the IP Address field, type the new value as specified by the customer's
network administrator (default is 10.1.1.10, factory preset is 10.1.1.10).
b. At the Subnet Mask field, type the new value as specified by the
customer's network administrator (default is 255.0.0.0).
c. At the Gateway Address field, type the new value as specified by the
customer's network administrator (default is 0.0.0.0).
(Figure 42).
(Figure 41).
Edge Switch 2/32 Installation Guide