5. Click OK. The Embedded Web Server interface opens with the View window
Figure 35: Embedded Web Server interface—View window
Configure Switch Ports
Perform the procedure in this section to configure names and operating
characteristics for the switch ports.
To configure one or more ports:
1. At the View window, click Configure at the left side of the window. The
Edge Switch 2/32 Installation Guide
displayed
(Figure
35).
Configure window opens with the Ports tab displayed
a. For each port to be configured, type a port name of 24 alphanumeric
characters or less in the associated Name field. The port name should
identify the device to which the port is attached.
b. Choose the check box in the Blocked column to block or unblock a port
(default is unblocked). A check mark in the box indicates the port is
blocked. Blocking a port prevents the attached device from
communicating with the switch. A blocked port continuously transmits
the offline sequence (OLS)
Using the Embedded Web Server
(Figure
36).
(Figure
36).
89