Block Or Unblock A Port From The Configure Window - HP storageworks 2/32 Installation Manual

Using the Embedded Web Server
Figure 36: Block or unblock a port from the Configure window
2. Click Activate to save the information. The message Your changes to
90
c. Choose the check box in the 10-100 km column to enable extended
distance buffering for a port (default is disabled). A check mark in the box
indicates extended distance operation up to 100 kilometers (through
repeaters) is enabled.
d. Select a Type field and choose generic port (G_Port), fabric port
(F_Port), or expansion port (E_Port) from the list box. If F_Port or
E_Port is selected, the port will only operate as the port type selected. If
G_Port is selected, the port type is automatically detected and will
operate as an E_Port or F_Port.
e. Click the Speed field for a port. A Speed drop-down list displays. Choose
1 Gb/sec, 2 Gb/sec, or Negotiate as the desired setting. This
setting depends on the speed capability of the device to be plugged into
the port.
the port configuration have been successfully
activated displays.
Edge Switch 2/32 Installation Guide