Port Properties Dialog Box - HP storageworks 2/32 Installation Manual

8. Double-click the port connector used to make this ISL connection to open the
Figure 32: Port Properties dialog box
9. Ensure the Link Incident field displays None and the Reason field is blank.
Note:
Threshold %) displays in the Port Properties dialog box. This field displays the active
congested threshold percentage currently configured in the Configure Open Trunking
dialog box.
Edge Switch 2/32 Installation Guide

Port Properties dialog box

If an ISL segmentation or other problem is indicated, refer to the HP
StorageWorks Edge Switch 2/32 Service Manual to isolate the problem. If no
problems are indicated, installation tasks are complete.
If the Open Trunking feature is installed, an additional field (Congested
Installing and Configuring the Edge Switch 2/32
(Figure 32).
81