Install Hafm Client On A Remote Workstation - HP storageworks 2/32 Installation Manual

Installing and Configuring the Edge Switch 2/32

Install HAFM Client on a Remote Workstation

Use these steps to install HAFM on a remote client:
1. Verify the workstation and the Ethernet LAN segment (with the Edge Switch
2. At the workstation, launch the browser application.
3. At the browser, type the HAFM server IP address.
4. The HAFM splash screen displays with the following options, see
Figure 33: HAFM remote client install
5. To install the remote client application, scroll down to the information that
6. After you have downloaded the installer executable, the InstallAnywhere
84
2/32 attached) are connected through the Internet.
a. Install HAFM remote client application—Choose this option to install
the application for your workstation platform.
b. Download SNMP MIB files—The Management Information Base (MIB)
files are provided in standard ASN.1 syntax and may be installed into the
MIB database of any SNMPv2 compliant Network Management Station.
pertains to your platform, and follow the instructions provided.
Wizard displays. Follow the instructions provided to continue the installation.
Figure
Edge Switch 2/32 Installation Guide
33.