Launch Ews; Username And Password Required Dialog Box - HP storageworks 2/32 Installation Manual

Using the Embedded Web Server

Launch EWS

Use the following steps to launch EWS.
Note:
Netscape Navigator 4.6 or higher, or Microsoft Internet Explorer 4.0 or higher.
1. Ensure the browser-capable PC and the Ethernet LAN segment (with the
2. At the PC, launch the browser application (Netscape Navigator or Internet
3. At the browser, enter the IP address of the switch as the internet uniform
Figure 34: Username and Password Required dialog box
4. Type the default user name and password.
Note:
The user name and password are case-sensitive.
88
Internet access and a standard Web browser is required. HP recommends
switch attached) are connected.
Explorer).
resource locator (URL). Use the default IP address of 10.1.1.10, the factory
preset of 10.1.1.10, or the IP address configured while performing
Switch Network Information" on page 38. The Username and Password
Required dialog box displays
The default user name is Administrator and the default password is password.
(Figure 34).
Edge Switch 2/32 Installation Guide
"Configure