Fr Protocol; Figure 76 Mppp Configuration Example - Zte ZXR10 GER User Manual

F 7 6 M C
I G U R E P P P O N F I G U R A T I O N
Multi_7/1
R1
192.168.1.1/30
Configuration of R1:
ZXR10_R1(config)#interface multilink 7/1
ZXR10_R1(config-if)#ip address 192.168.1.1 255.255.255.252
ZXR10_R1(config)#controller e1_7/1
ZXR10_R1(config-control)#framing frame
ZXR10_R1(config-control)#channel-group 1 timeslots 1-31
ZXR10_R1(config)#interface e1_7/1.1
ZXR10_R1(config-if)#multilink-group multi_7/1
Configuration of R2:
ZXR10_R2(config)#interface multi_7/1
ZXR10_R2(config-if)#ip address 192.168.1.2 255.255.255.252
ZXR10_R2(config)#controller e1_7/1
ZXR10_R2(config-control)#framing frame
ZXR10_R2(config-control)#channel-group 1 timeslots 1-31
ZXR10_R2(config)#interface e1_7/1.1
ZXR10_R2(config-if)#multilink-group multi_7/1
Note: When one device is interconnected with multiple routers
through multilink, E1 interfaces corresponding to multilink
interfaces of routers must have different identifiers.
Following command can be used to view information about
multilink.
T 1 7 1 S P P P C
A B L E H O W
Command Command
Format Mode
show ppp
User, Privileged
multilink

FR Protocol

FR protocol covers the following topics which are described
below.
Topic
FR Overview
Configuring FR
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 9 Link Protocol Configuration
E
X A M P L E
192.168.1.2/30
Multi_7/1
R2
O M M A N D
Command Function
This Displays summary
information about multilink
Page No
142
142
141