Viewing System Information - Zte ZXR10 GER User Manual

4. To set Telnet username and password, use username
5. To set system time, use clock set <current-time> <month>
E
ND OF STEPS
Related For more information about system management please refer to
Information below procedure.

Viewing System Information

Purpose Refer to below procedure for viewing system information of ZTE
GER.
Prerequisite Router Command Line Interface has been accessed.
T 7 6 E S
A B L E N A B L E E C R E T
Command Format
enable secret {0
<password>|5
<password>|<password>}
Result: This configures privileged password in order to
confirm read/write action.
Note: In the privileged mode, a user can configure operation
parameters and also can enter the configuration mode.
<username> password <password> command in global
configuration mode, as shown in Table 77.
T 7 7 T U
A B L E E L N E T S E R N A M E
Command Command
Format Mode
username
<username>
Global Config
password
<password>
Result: This configures username and password for telnet
session.
<day> <year> command in privilged mode, as shown in
Table 78.
T 7 8 C S C
A B L E L O C K E T
Command Command
Format Mode
clock set
<current-time>
Exec
<month>
<day> <year>
Result: This configures system time.
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 5 System Management
C W
O M M A N D I N D O W
Command
Mode
Global
Config
C W
O M M A N D I N D O W
Command Function
This sets Telnet user and
password
W
O M M A N D I N D O W
Command Function
This sets System time
Command
Function
This sets password
for privileged mode
81