C h a p t e r
Bridge Configuration
Introduction
This chapter introduces the bridging of POS and ATM interfaces,
and relevant configurations on ZXR10 GER.
Contents
This chapter covers the following topics.
T
A B L E
Topic
POS Interface Bridge
ATM Interface Bridge
POS Interface Bridge
POS Bridge Overview
Layer 3
Bridge function of the POS interface covers: layer 3 function and
Function
transparent transmission of the bridge interface.
Link Layer
As a link layer protocol, the PPP is responsible for establishing,
Protocol
deleting and maintaining layer 2 links. PPP negotiation process is
as follows: LCP negotiation Establish (establish links) CHAP or
PAP authentication.
1 0
1 8 0 T
I
C
O P I C S
N
H A P T E R
Layer 3 function of the bridge interface indicates that the PPP
link is directly connected with the Ethernet with BCP
encapsulation.
The
encapsulation can serve as an Ethernet interface and has
attributes of the Ethernet interface, such as ARP learning.
Transparent
transmission
interface is implemented through V_Switch functions. With
the V_Switch forwarding table, transparent transmission is
available between the POS interface and the Ethernet and
ATM interfaces.
Confidential and Proprietary Information of ZTE CORPORATION
1 0
POS
layer
3
interface
function
of
Page No
147
151
using
BCP
the
POS
bridge
147