Atm Protocol Configuration; Atm Bandwidth - Zte ZXR10 Command Manual

Function
Command Mode
Syntax
Syntax
Description
Instructions
Example
2
C h a p t e r
ATM Protocol
Configuration
Table of Contents
atm bandwidth ................................................................... 7
atm pvc ............................................................................ 8
oam retry .......................................................................... 8
oam-pvc ........................................................................... 9
show atm pvc .................................................................... 9

atm bandwidth

Use this command to configure ATM interface bandwidth. Delete
the bandwidth (set bandwidth to 0) with the no form of this com-
mand.
Interface configuration
atm bandwidth {pcr-kbits <bandwidth>| pcr-cells <bandwidt
h>}
no atm bandwidth
pcr-kbits <bandwid
th>
pcr-cells <bandwid
th>
� It is only applied to ZXR10 GER.
� By default, the interface bandwidth is 2M.
This example describes how to configure the bandwidth of
atm155_1/1.1 to 2M.
ZXR10(config)#interface atm155_1/1.1
ZXR10(config-if)#atm bandwidth pcr-kbits 2000
Confidential and Proprietary Information of ZTE CORPORATION
Bandwidth, unit: Kbps, range: 64~155520
Bandwidth corresponding to the numbers
of cells per second, unit: Kbps, range:
150~366794
7