Zte ZXR10 GER User Manual page 200

ZXR10 GER (V2.6.03) General Excellent Router User Manual Volume-I
178 Confidential and Proprietary Information of ZTE CORPORATION
7. To enable the poison reverse mechanism, use the ip poison-
reverse command in RIP interface configuration mode as
shown in Table 217.To disable the split horizon mechanism,
use the no form of this command.
T 2 1 7 I P
A B L E P O I S O N
Command
Format
ip poison-
reverse
Result: This enables redistribution of other protocols in RIP
routing domain.
8. To redistribute a route from another routing domain to rip
routing domain use command redistribute <protocol>
[metric <value>]
configuration mode as shown in Table 218 .To disable this,
use the no form of this command.
T 2 1 8 R
A B L E E D I S T R I B U T E
Command
Format
redistribute
<protocol>
[metric
<value>]
[route-map
<map-tag>]
<protocol> refers to both EGP and IGP protocols.
<value> ranges from <0-16>.
<map-tag> refers to a tag values through route recognize.
Result: This enables redistribution of other protocols in RIP
routing domain.
9. To set default metric values for RIP, use this form of the
default-metric command in RIP router configuration mode
as shown in Table 219 . To return to the default state, use
the no form of this command.
T 2 1 9 D
A B L E E F A U L T
Command
Format
default-metric
<number>
ranges from <1-16>.
<number>
Default-metric command is used in conjunction with the
redistribute router configuration command to cause the
R C
E V E R S E O M M A N D
Command Command Function
Mode
RIP Interface This enables redistribution of
Config other protocols in RIP
routing domain.
[route-map
C W
O M M A N D I N D O W
Command Command Function
Mode
RIP Config
This helps to configure metric
values for other routing protocols.
M C W
E T R I C O M M A N D
Command Command Function
Mode
RIP Interface This enables the poison
Config reverse mechanism
W
I N D O W
<map-tag>] in
I N D O W
RIP