Zte ZXR10 GER User Manual page 277

T 3 0 3 S I
A B L E H O W P
Command
Format
show ip bgp
summary
Result: This displays the status of all BGP neighbor
connections.
In addition to the show commands, the debug commands
also can be used to observe the BGP adjacency setup
process and route update process.
Command
Format
debug ip bgp in
debug ip bgp out
debug ip bgp
events
The debug ip bgp events command is used to trace the
state transition of BGP:
ZXR10#debug ip bgp events
BGP events debugging is on
ZXR10#
04:10:07: BGP: 192.168.1.2 reset due to Erroneous BGP Open
received
04:10:07: BGP: 192.168.1.2 went from Connect to Idle
04:10:08: BGP: 192.168.1.2 went from Idle to Connect
04:10:13: BGP: 192.168.1.2 went from Connect to OpenSent
04:10:13: BGP: 192.168.1.2 went from OpenSent to OpenConfirm
04:10:13: BGP: 192.168.1.2 went from OpenConfirm to Established
ZXR10#
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 16 BGP Configuration
B S C
G P U M M A R Y O M M A N D
Command Command Function
Mode
This displays the status of
privileged
all BGP neighbor
connections
Command Command Function
Mode
Traces and displays
notification packets sent by
Privileged
BGP and lists error ID and
sub error ID
Traces and displays
notification packets sent by
Privileged
BGP and lists error ID and
sub error ID
Traces and displays the
Privileged state machine transition of
the BGP connection
255