Mpls Te Maintenance & Diagnosis - Zte ZXR10 GER User Manual

ZXR10 GER (V2.6.03) General Excellent Router User Manual Volume-I
Purpose
Prerequisite
Steps
324 Confidential and Proprietary Information of ZTE CORPORATION
Command Format
tunnel
destination {ipv4
| ipv6} <ip-
address>
tunnel mpls
traffic-eng
bandwidth
<bandwidth>
tunnel mpls
traffic-eng path-
option <number>
{dynamic | explicit
{name <path-
name> | identifier
<id> }}
tunnel mpls
traffic-eng
record-route
ip explicit-
path{name
<name> | identifier
<identifier>}next-
address < A.B.C.D>
{ loose | strict }
Result: This configures the tunnel with all the necessary
attributes.
E .
ND OF STEPS
MPLS TE Maintenance & Diagnosis
This procedure describes how to diagnose and maintain MPLS
configuration.
Router Command Line Interface has been accessed.
1. To check the network connectivity, use command ping <ip
address> in Privileged mode as shown in Table 371.
T 3 7 1 P C
A B L E I N G
Command Command
Format Mode
ping <ip Privileged
addre>
Result: This verifies the network connectivity.
2. To view MPLS TE enabled nodes interfaces, use show mpls
[<interface_id>] command in Privileged mode as shown in
Table 372.
Command
Mode
Tunnel
interface
config
Tunnel
interface
config
Tunnel
interface
config
Tunnel
interface
config
Global config
O M M A N D
Command Function
This verifies the network
connectivity
Command Function
This sets an ip address
for the tunnel destination
router
This sets the parameter
for maximum available
bandwidth
This sets an ERO for
MPLS TE
This record the routes
used by tunnel
This configures an IP
explicit path