Data Backup And Recovery - Zte ZXR10 GER User Manual

ZXR10 GER (V2.6.03) General Excellent Router User Manual Volume-I
Example
Purpose
Prerequisite
Steps
78 Confidential and Proprietary Information of ZTE CORPORATION
T 7 0 S V
A B L E H O W
Command Command
Format Mode
show Exec
version
Result: This indicates new image file present in directory
Note:
Reboot ZXR10 GER, Based on method mentioned in Step
8, change the boot mode to "Boot from the FLASH". In
this case,
"/flash/img/zxr10.zar" automatically.
Note: The boot mode also can be changed to "Boot from the
FLASH" by using the command nvram imgfile- location local
in the global configuration mode.
Under [ZXR10 Boot]: enter "@" and press <ENTER>, system
boots with new image from FLASH.
After normal boot, view the image version under running and
confirm whether the upgrading is successful.
E
ND OF STEPS
Example is given in steps.

Data Backup and Recovery

This procedure delivers information about how to make backup
and recovery of image files present in flash.
Router Command Line Interface has been accessed.
TFTP server is up and running as described in TFTP configuration
topic.
1. To save running configuration into NVRAM and flash, use
write/ write flash command, as shown in Table 71.
T 7 1 W C
A B L E R I T E
Command
Command
Mode
Format
write Exec
write Exec
flash
write Exec
logging
write Exec
nvram
C W
E R S I O N O M M A N D I N D O W
Command Function
This indicates software version of
flash and new image file present
in directory
"Boot path"
W
O M M A N D I N D O W
Command Function
This starts writing function
This writes to flash memory
This writes running system file to
M&S UPC
This writes to NVRAM memory
will change to