Brocade Communications Systems ICX 6610 Installation Manual page 59

2. Remove the previously installed power supply from the appropriate slot by removing the chassis attachment screws located in
the upper right and lower left of the power supply unit using a flat-head screwdriver.
FIGURE 46 DC power supply screws
1 Chassis attachment screws
2 Assembly screws
3. Before opening the package that contains the DC power supply, touch the bag to the switch casing to discharge any potential
static electricity.
4. Remove the DC power supply from the anti-static shielded bag.
Brocade ICX 6610 Stackable Switch Hardware Installation Guide
53-1003620-03
Power supplies for the Brocade ICX 6610
59