Brocade Communications Systems ICX 6610 Installation Manual page 33

Use the following steps to mount devices in a two-post rack.
1. Attach the mounting brackets to the sides of the device using the 8-32 x 3/8 in. screws.
There are two sets of holes, labeled "A" or "B." Use the holes labeled "A" if you want the device to be flush with the rack rails.
FIGURE 22 Attaching the brackets on an ICX 6610, flush-rail mounting
1. Bracket
Use the holes labeled "B" if you want the device to protrude 4-1/2 inches from the front of the rail rack.
Brocade ICX 6610 Stackable Switch Hardware Installation Guide
53-1003620-03
2. 32 x 3/8 in. screws
Installing the device
33