Brocade Communications Systems ICX 6610 Installation Manual page 32

Installing the device
FIGURE 21 Two-post rack mount kit for the Brocade ICX 6610
1. Bracket, front right
2. Bracket, front left
3. Screw, 8-32 x 3/8 in., panhead Phillips
32
4. Screw, 10-32 x 5/8 in., panhead Phillips
5. Retainer nut, 10-32, (for square-hole rack rails)
6. Retainer nut, 10-32, (for round-hole rack rails)
Brocade ICX 6610 Stackable Switch Hardware Installation Guide
53-1003620-03